[SOLVED] P0820 Code: Fix Gear Lever X-Y Position Sensor Circuit Issue!

The automobile fault code P0820 indicates a problem with the Gear Lever X-Y Position Sensor.

This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0820 fault code.

  • The symptoms of the automobile fault code P0820 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0820 can be caused by a faulty Gear Lever X-Y Position Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

  • The automobile fault code p0820 can be caused by the following: a faulty Gear Lever X-Y Position Sensor, an open or shorted Gear Lever X-Y Position Sensor harness, and a poor electrical connection in the Gear Lever X-Y Position Sensor circuit.

To fix the p0820 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0820, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix typically takes around 1.0 hour to complete.

The automobile fault code P0820 can be diagnosed and fixed within an estimated repair time of 1.0 hour. Most auto repair shops typically charge between $75 and $150 per hour for their services.

The P0820 fault code refers to a problem with the Gear Lever X-Y Position Sensor circuit. This sensor is monitored by the Transmission Control Module (TCM) in your vehicle.

When the Gear Lever X-Y Position Sensor does not meet the factory specifications, the TCM sets the P0820 code in the OBDII system.

In simpler terms, this fault code indicates that there is an issue with the sensor that detects the position of the gear lever in your vehicle. The TCM is responsible for monitoring this sensor, and if it detects that the sensor is not functioning correctly, it will trigger the P0820 code. This code helps mechanics diagnose and fix the problem with the gear lever sensor circuit.

What are the possible causes of the p0820 fault code and how can I visually inspect them?

If you’re experiencing the p0820 fault code with the symptom of the engine light being on, there are a few possible causes to consider. It could be due to a faulty Gear Lever X-Y Position Sensor, an open or shorted harness for the sensor, or a poor electrical connection in the sensor circuit. To visually inspect these potential causes, check the wiring harness and connectors related to the sensor. Look for any signs of damage, such as broken or bent components, pushed out pins, or corrosion on the connector.

How does a faulty Gear Lever X-Y Position Sensor contribute to the p0820 fault code and what steps can I take to fix it?

If you’re experiencing the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Gear Lever X-Y Position Sensor. This can happen if the sensor harness is open or shorted, or if there is a poor electrical connection in the sensor circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Taking these steps can help identify and resolve the problem.

What should I look for when inspecting the wiring harness and connectors related to the p0820 fault code, and how can I determine if any components are damaged or if there are any issues with the connector’s pins?

When inspecting the wiring harness and connectors related to the p0820 fault code, there are a few things to look out for. Start by visually inspecting the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins in the connector. These issues can cause poor electrical connections and lead to the fault code. By carefully examining these components, you can determine if any components are damaged or if there are any issues with the connector’s pins.

p0820 error fault code explained

If your engine light is on and you’re seeing the P0820 fault code, it could be due to a faulty Gear Lever X-Y Position Sensor or issues with the sensor’s wiring harness and circuit connection. To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.

Scroll to Top