The automobile fault code P0797 indicates a problem with the pressure control solenoid valve ‘C’ in the transmission.
The symptoms of this issue may include erratic shifting, slipping gears, or a complete failure to engage.
The most common causes of this fault code are a low transmission fluid level, dirty transmission fluid, a faulty pressure control solenoid valve ‘C’, an open or shorted harness, or poor electrical connections. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins. The repair time for this problem is estimated to be around 1.0 hour.
It is important to address this issue promptly to avoid further damage to the transmission.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms: Unveiling The Mystery Of Code P0797
Experiencing issues with your vehicle’s transmission?
Check out the symptoms of fault code P0797 below.
- The symptoms of the automobile fault code P0797 may include: delayed or harsh shifting, slipping or erratic shifting, transmission overheating, decreased fuel efficiency, illuminated check engine light, and reduced engine power.
Unveiling The Culprits: What Causes Fault Code P0797?
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The automobile fault code p0797 can be caused by various factors, including low transmission fluid level, dirty transmission fluid, and a faulty pressure control solenoid valve ‘C’.
- The fault code P0797 can be caused by: low transmission fluid level, dirty transmission fluid, faulty pressure control solenoid valve ‘C’, open or shorted pressure control solenoid valve ‘C’ harness, and poor electrical connection in the pressure control solenoid valve ‘C’ circuit.
Fixing Code P0797: Step-By-Step Guide To Resolve Transmission Pressure Control Solenoid C Stuck On
To fix the p0797 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0797, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix should take approximately 1.0 hour.
Cracking The Code: P0797 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p0797 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.
These factors will determine the overall cost of diagnosing and fixing the p0797 fault code.
Decode The Mystery: Understanding The P0797 Fault Code
The fault code P0797 indicates a discrepancy between the gear required by the Engine Control Module (ECM) and the actual gear being used while driving.
This means that the ECM is expecting the vehicle to be in a specific gear, but the actual gear being used does not match this expectation. This can lead to issues with the vehicle’s performance and can cause problems with shifting gears smoothly. It is important to address this fault code promptly to ensure proper functioning of the transmission system.
FAQ
The fault code P0797 in an automobile can be caused by various factors. These include a low transmission fluid level, dirty transmission fluid, a faulty pressure control solenoid valve ‘C’, an open or shorted harness for the pressure control solenoid valve ‘C’, or a poor electrical connection in the pressure control solenoid valve ‘C’ circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, check for any damaged components, and look for broken, bent, pushed out, or corroded pins in the connectors.
To visually inspect the wiring harness and connectors related to the pressure control solenoid valve ‘C’, start by checking the possible causes such as low transmission fluid level, dirty transmission fluid, faulty pressure control solenoid valve ‘C’, and poor electrical connection in the pressure control solenoid valve ‘C’ circuit. Then, visually inspect the wiring harness and connectors for any damage or issues. Look out for broken, bent, pushed out, or corroded pins in the connectors.
When checking for damaged components or broken, bent, pushed out, or corroded connector’s pins, there are a few things to keep in mind. These issues can be the result of low transmission fluid level, dirty transmission fluid, a faulty pressure control solenoid valve ‘C’, or a poor electrical connection in the pressure control solenoid valve ‘C’ circuit. To fix the problem, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and pay close attention to the connector’s pins for any signs of breakage, bending, pushing out, or corrosion.
Wrap Up
To fix the P0797 fault code, start by checking the transmission fluid level and ensuring it is at the correct level.
Next, inspect the transmission fluid for any dirt or contamination. If the fluid is clean, the issue may lie with a faulty pressure control solenoid valve ‘C’.
Check the wiring harness and connectors for any damage or poor electrical connections.
Look out for broken, bent, pushed out, or corroded pins on the connectors.
