The automobile fault code P0772 indicates a problem with the shift solenoid ‘E’ valve in the transmission. Symptoms may include erratic shifting, harsh shifting, or the transmission not shifting at all.
The most common causes of this fault code are a low transmission fluid level, dirty transmission fluid, a faulty shift solenoid ‘E’ valve, an open or shorted shift solenoid ‘E’ valve harness, or a poor electrical connection in the shift solenoid ‘E’ valve circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. It is important to address this problem promptly as it can lead to further damage to the transmission.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms Of Code P0772: Unveiling The Culprit!
Experiencing shifting issues, slipping gears, and decreased fuel efficiency? Check out the symptoms of fault code p0772 below.
- The symptoms of the automobile fault code P0772 include: erratic shifting, delayed or harsh shifting, slipping gears, transmission overheating, decreased fuel efficiency, illuminated check engine light, and reduced engine power.
Unraveling The Mystery: What Causes Fault Code P0772?
The automobile fault code p0772 can be caused by a low transmission fluid level, dirty transmission fluid, a faulty shift solenoid ‘E’ valve, an open or shorted shift solenoid ‘E’ valve harness, or a poor electrical connection in the shift solenoid ‘E’ valve circuit.
- The fault code P0772 can be caused by: low transmission fluid level, dirty transmission fluid, faulty shift solenoid ‘E’ valve, shift solenoid ‘E’ valve harness being open or shorted, and a poor electrical connection in the shift solenoid ‘E’ valve circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P0772: A Step-By-Step Guide To Resolve The Issue
To fix the p0772 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0772, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P0772 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p0772 are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0772 fault code.
Cracking The Code: P0772 – When Transmission Slips Into Overdrive!
The P0772 fault code is triggered when the gear requested by the ECM (Engine Control Module) does not align with the actual gear being used while the vehicle is in motion. This discrepancy can cause issues with the transmission and affect the overall performance of the vehicle.
It is important to address this fault code promptly to prevent further damage and ensure smooth operation of the transmission system.
FAQ
If you’re experiencing fault code P0772 in your automobile, there are a few possible causes to consider. It could be due to a low transmission fluid level, dirty transmission fluid, a faulty shift solenoid ‘E’ valve, an open or shorted shift solenoid ‘E’ valve harness, or a poor electrical connection in the shift solenoid ‘E’ valve circuit. To fix this issue, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors, looking for any damage or broken, bent, pushed out, or corroded pins in the connectors.
To visually inspect the wiring harness and connectors related to the shift solenoid ‘E’ valve, start by checking the possible causes: low transmission fluid level, dirty transmission fluid, faulty shift solenoid ‘E’ valve, open or shorted shift solenoid ‘E’ valve harness, and poor electrical connection in the shift solenoid ‘E’ valve circuit. Then, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. This will help identify any issues and guide you towards the appropriate fix.
When troubleshooting fault code P0772, it’s important to check for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By addressing these issues, you can help resolve the problem and ensure smooth transmission operation.
Wrap Up
If you’re experiencing issues with your transmission, such as erratic shifting or slipping, the P0772 fault code might be the culprit.
This code is typically caused by a low transmission fluid level, dirty fluid, or a faulty shift solenoid ‘E’ valve. To fix it, check the possible causes, inspect the wiring harness and connectors, and look for any damaged components or corroded pins.
