The automobile fault code P0673 indicates a problem with the glow plug in cylinder #3.
The symptoms may include difficulty starting the engine, rough idling, or decreased engine performance.
The most common cause is a faulty glow plug or issues with the wiring harness and connectors.
It is important to address this issue promptly as it can lead to further damage to the engine. The repair process involves visually inspecting the wiring harness and connectors for any damage and checking for broken or corroded pins.
The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms Of Fault Code P0673: When Is It Detected?
Experiencing difficulty starting your vehicle?
Check out the symptoms of fault code p0673 below.
- The symptoms of the automobile fault code P0673 include difficulty starting the engine, rough idling, misfires, decreased engine power, and increased fuel consumption.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Unraveling The Mystery: What Causes Fault Code P0673?
The automobile fault code p0673 can be caused by a faulty cylinder #3 glow plug, an open or shorted cylinder #3 glow plug harness, a poor electrical connection in the cylinder #3 glow plug circuit, or a faulty glow plug module.
- The fault code P0673 can be caused by the following: a faulty cylinder #3 glow plug, an open or shorted cylinder #3 glow plug harness, a poor electrical connection in the cylinder #3 glow plug circuit, or a faulty glow plug module.
Fixing Code P0673: Step-By-Step Guide To Resolve The Issue
To fix the automobile fault code p0673, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0673, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the code.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P0673 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p0673 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
Cracking The Code: P0673 – When And Why Is It Detected?
The fault code P0673 indicates a problem with the glow plug circuit in cylinder #3. The Engine Control Module (ECM) has detected this issue and is alerting the driver. The glow plug circuit is responsible for heating the cylinder during cold starts, aiding in combustion.
When this circuit malfunctions, it can lead to difficulties in starting the engine, especially in colder temperatures. It is important to address this issue promptly to ensure proper engine performance and avoid potential damage.
FAQ
The fault code P0673 in an automobile could be caused by a faulty cylinder #3 glow plug, an open or shorted cylinder #3 glow plug harness, a poor electrical connection in the cylinder #3 glow plug circuit, or a faulty glow plug module. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Additionally, refer to the possible causes mentioned above for further troubleshooting.
To visually inspect the wiring harness and connectors related to cylinder #3 glow plug, start by checking for any damaged components. Look closely for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit. If you find any problems, address them accordingly. This inspection is crucial in diagnosing and fixing the faulty glow plug or glow plug module.
When troubleshooting fault code P0673, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open/short circuit in the cylinder #3 glow plug system. By checking and addressing these possible causes, you can effectively fix the fault code.
Wrap Up
To fix the P0673 fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion.
Check the cylinder #3 glow plug and its circuit for any open or shorted connections. Also, examine the glow plug module for any faults.
Addressing these possible causes will help resolve the issue.
