The automobile fault code P0660 indicates a problem with the Intake Manifold Tuning Valve (IMTV).
The symptoms may include poor engine performance, decreased fuel efficiency, and rough idling. The cause of this fault code could be a faulty IMTV, an open or shorted IMTV harness, or a poor electrical connection in the IMTV circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to prevent further damage to the engine.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode P0660: Unveiling The Symptoms Of This Automobile Fault Code
Experiencing engine misfires, rough idling, and decreased fuel efficiency?
Check out the symptoms of fault code P0660 below.
- The symptoms of the automobile fault code P0660 include: engine misfires, rough idling, decreased fuel efficiency, stalling or hesitation during acceleration, illuminated check engine light, and reduced engine power.
Unveiling The Culprits: Code P0660 Possible Causes
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The automobile fault code P0660 can be caused by a faulty Intake Manifold Tuning Valve (IMTV), an open or shorted IMTV harness, or a poor electrical connection in the IMTV circuit.
- The fault code P0660 can be caused by: a faulty Intake Manifold Tuning Valve (IMTV), an open or shorted Intake Manifold Tuning Valve harness, or a poor electrical connection in the Intake Manifold Tuning Valve circuit.
Fixing Code P0660: Simple Steps To Resolve The Issue!
To fix the p0660 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P0660, first, check the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix typically takes around 1.0 hour to complete.
Cracking The Code: P0660 Fixing Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code P0660 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the P0660 fault code.
Unveiling The Mystery: Code P0660 Symptoms And Solutions
When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P0660. This code indicates a problem with the intake manifold tuning valve control circuit.
The intake manifold tuning valve is responsible for adjusting the length of the intake manifold runners, optimizing the airflow into the engine. When this valve malfunctions, it can lead to poor engine performance, reduced fuel efficiency, and increased emissions. To fix the P0660 fault code, you will need to diagnose the issue by checking the wiring and connections related to the intake manifold tuning valve.
It is also important to inspect the valve itself for any signs of damage or blockage. Once the problem is identified, the faulty component should be repaired or replaced accordingly.
Ignoring this fault code can lead to further engine damage and increased repair costs.
FAQ
The fault code P0660 in an automobile can be caused by a faulty Intake Manifold Tuning Valve (IMTV), an open or shorted IMTV harness, or a poor electrical connection in the IMTV circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
To visually inspect the wiring harness and connectors related to the Intake Manifold Tuning Valve (IMTV), start by checking for any damaged components. Look closely for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit. By conducting a thorough visual inspection, you can identify any faults and determine if the IMTV or the wiring harness and connectors are the cause of the problem.
When checking the connector’s pins for fault code P0660, there are a few things to look out for. The symptom of this code is not specified, but the cause could be a faulty Intake Manifold Tuning Valve (IMTV), an open or shorted IMTV harness, or a poor electrical connection in the IMTV circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage. Pay close attention to the connector’s pins and look for any signs of being broken, bent, pushed out, or corroded.
Wrap Up
To fix the P0660 fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion. Check the Intake Manifold Tuning Valve (IMTV) for any issues.
Make sure the harness is not open or shorted and that there is a good electrical connection. Examine the connector’s pins for any signs of being broken, bent, pushed out, or corroded.
