The automobile fault code P0659 indicates a problem with the transmission solenoids or the powertrain control module (PCM). The most common symptom is the engine light being illuminated.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.
The repair time for this fault code is estimated to be around 1.0 hour.
It is important to address this issue promptly to prevent further damage to the transmission system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling The Symptoms Of Fault Code P0659: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0659 fault code.
- The symptoms of the automobile fault code P0659 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Code P0659 Possible Causes Revealed!
The automobile fault code p0659 can be caused by faulty transmission solenoids, open or shorted harness, poor electrical connection in the solenoid circuit, or a faulty powertrain control module (PCM).
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P0659 can be caused by: faulty transmission solenoids, an open or shorted transmission solenoids harness, a poor electrical connection in the transmission solenoids circuit, or a faulty powertrain control module (PCM).
Fixing Code P0659: Simple Steps To Resolve The Issue!
To fix the p0659 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P0659, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix typically takes around 1.0 hour to complete.
Cracking The Code: P0659 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p0659 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
P0659: Understanding The Mysterious Fault Code And Its Implications
The P0659 fault code refers to the Actuator Supply Voltage ‘A’ Circuit being too high. This code is set by the Powertrain Control Module (PCM) when it detects that the voltage returning from the transmission solenoid circuits is not at the correct level.
The PCM monitors these circuits by supplying voltage to the solenoids and then checking for the voltage returning through each solenoid control wire. If the voltage is too high, the PCM will set the P0659 code. This code indicates a problem with the actuator supply voltage, which can affect the performance of the transmission solenoids.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P0659 could be the culprit. This code is often caused by faulty transmission solenoids, an open or shorted transmission solenoids harness, a poor electrical connection in the transmission solenoids circuit, or a faulty powertrain control module (PCM). To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P0659 fault code and your engine light is on, it’s time to take action. The possible causes include faulty transmission solenoids, an open or shorted transmission solenoids harness, a poor electrical connection in the transmission solenoids circuit, or a faulty powertrain control module (PCM). To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t delay, get to the bottom of this problem and get your engine running smoothly again.
To resolve the P0659 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Transmission Solenoids harness, poor electrical connections, or a faulty Powertrain Control Module (PCM). Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
Wrap Up
If your engine light is on and you’re dealing with a P0659 fault code, it could be due to faulty transmission solenoids, an open or shorted transmission solenoid harness, a poor electrical connection in the transmission solenoid circuit, or a faulty powertrain control module (PCM). To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
