The automobile fault code P0658 indicates a problem with the Transmission Solenoids.
The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.
The cause of this fault code can be a faulty Transmission Solenoid, an open or shorted harness, a poor electrical connection in the solenoid circuit, or a faulty Powertrain Control Module (PCM).
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0.
It is important to address this fault code promptly to prevent further damage to the transmission system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Symptoms Of Fault Code P0658: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0658 fault code.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The symptoms of the automobile fault code P0658 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Demystifying The Causes Of Code P0658
The automobile fault code p0658 can be caused by faulty transmission solenoids, open or shorted harness, poor electrical connection in the solenoid circuit, or a faulty powertrain control module (PCM).
- The fault code P0658 can be caused by: faulty transmission solenoids, an open or shorted transmission solenoids harness, a poor electrical connection in the transmission solenoids circuit, or a faulty powertrain control module (PCM).
Fixing Code P0658: Simple Steps To Resolve The Issue!
To fix the p0658 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P0658, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P0658 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p0658 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.
P0658: Understanding The Mysterious Fault Code And Its Implications
The P0658 fault code refers to the Actuator Supply Voltage ‘A’ Circuit being low. This code is set by the Powertrain Control Module (PCM) when it detects that the voltage returning from the transmission solenoid circuits is not at the correct level.
The PCM monitors these circuits by supplying voltage to the solenoids and then checking for voltage returning through each solenoid control wire. If the voltage is too low, the PCM will set the P0658 code.
When this fault code is triggered, it indicates that there is an issue with the actuator supply voltage circuit. This can lead to problems with the transmission solenoids, affecting the performance and operation of the transmission system. It is important to address this issue promptly to prevent further damage and ensure the proper functioning of the vehicle.
A professional diagnostic and repair should be carried out to identify the exact cause of the low voltage and resolve the P0658 fault code.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P0658 could be the culprit. This code is often caused by faulty transmission solenoids, an open or shorted transmission solenoids harness, a poor electrical connection in the transmission solenoids circuit, or a faulty powertrain control module (PCM). To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P0658 fault code and your engine light is on, it’s time to take action. The possible causes include faulty transmission solenoids, an open or shorted solenoid harness, a poor electrical connection in the solenoid circuit, or a faulty powertrain control module (PCM). To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t delay, get to the bottom of this problem and get your engine running smoothly again.
To resolve the P0658 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open/short circuit in the transmission solenoids harness. If necessary, replace any faulty transmission solenoids or the Powertrain Control Module (PCM). Don’t forget to check the “Possible Causes” mentioned above for a comprehensive solution.
Wrap Up
If your engine light is on and you’re dealing with a P0658 fault code, it could be due to faulty transmission solenoids, an open or shorted transmission solenoid harness, a poor electrical connection in the transmission solenoid circuit, or a faulty powertrain control module (PCM).
To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
