The automobile fault code P064A indicates a problem with the Fuel Pump Control Module. When this code appears, you may notice that the Engine Light is ON or the Service Engine Soon Warning Light is illuminated. The cause of this fault code could be a faulty Fuel Pump Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, refer to the “Possible Causes” listed above and follow the recommended steps for inspection and repair.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P064A
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p064a fault code.
- The symptoms of the automobile fault code P064A include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P064A?
The automobile fault code P064A can be caused by a faulty fuel pump control module, an open or shorted harness, or a poor electrical connection in the module circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P064A can be caused by the following: a faulty Fuel Pump Control Module, an open or shorted harness for the Fuel Pump Control Module, and a poor electrical connection in the Fuel Pump Control Module circuit.
Fixing Code P064A: Simple Steps To Resolve The Fault
To fix the automobile fault code p064a, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P064A, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix typically takes around 1.0 hour to complete.
Cracking The Code: P064A – Cost And Complexity Unveiled!
The automobile fault code P064A can be diagnosed and fixed within an estimated repair time of 1.0 hour.
Most auto repair shops typically charge between $75 and $150 per hour for their services.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
P064A Fault Code: Understanding The Description And Troubleshooting Steps
The P064A fault code refers to a problem with the fuel pump control module. The Engine Control Module (ECM) supplies voltage to the fuel pump control module when the ignition is on.
This voltage remains for 2 seconds unless the engine is cranked or run. During this time, the fuel pump control module supplies a varying voltage to the fuel tank pump module to maintain the desired fuel pressure.
However, if the fuel pump control module detects an over-temperature fault, it will trigger the P064A code. This code indicates a performance issue with the fuel pump control module.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P064A could be the culprit. This code is often caused by a faulty fuel pump control module, an open or shorted harness, or a poor electrical connection in the fuel pump control module circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, be sure to look out for broken, bent, pushed out, or corroded pins in the connectors.
If you’re dealing with the P064A fault code and your engine light is on, it’s time to take action. The culprit could be a faulty fuel pump control module or issues with the wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the problem.
When resolving the P064A fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues with the Fuel Pump Control Module or its circuit connections, which may be causing the engine light to turn on.
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Fuel Pump Control Module or issues with the module’s harness and electrical connection. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion.
Also, check for broken or bent pins on the connectors.
