The automobile fault code P060A indicates a problem with the Powertrain Control Module (PCM). The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be low battery voltage, a faulty PCM, an open or shorted PCM harness, or a poor electrical connection in the PCM circuit.
It is important to address this issue promptly as it can affect the performance and efficiency of your vehicle. The repair for this fault code involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for any broken, bent, pushed out, or corroded connector pins.
The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms: Unveiling The P060A Fault Code Mystery!
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p060a fault code.
- The symptoms of the automobile fault code P060A include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P060A?
The automobile fault code P060A can be caused by low battery voltage, a faulty Powertrain Control Module (PCM), or issues with the PCM harness or circuit connection.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P060A can be caused by: low battery voltage, reprogram Powertrain Control Module (PCM), faulty Powertrain Control Module, open or shorted Powertrain Control Module harness, and poor electrical connection in the Powertrain Control Module circuit.
Fixing Code P060A: Simple Steps To Resolve The Issue
To fix the p060a fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P060A, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix typically takes around 1.0 hour to complete.
Cracking The Code: P060A Fix – Cost And Complexity Unveiled!
The automobile fault code P060A can be diagnosed and fixed within an estimated repair time of 1.0 hour. Most auto repair shops typically charge between $75 and $150 per hour for their services.
P060A Fault Code: Understanding The Causes And Solutions
The P060A fault code is related to the internal microprocessor integrity of the control module. It specifically checks if the module is programmed correctly and monitors its ability to read and write to the memory.
This diagnostic also includes monitoring a timing function.
It is important to note that no external circuits are involved in this fault code.
The code is triggered when the control module detects an internal malfunction or incomplete programming.
FAQ
If you see the Engine Light ON or the Service Engine Soon Warning Light, the P060A fault code might be the culprit. This code can be caused by a variety of factors, including low battery voltage, a faulty Powertrain Control Module (PCM), an open or shorted PCM harness, or a poor electrical connection in the PCM circuit. To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, inspect for any damage or corrosion, and check if any components are broken or bent.
Low battery voltage can contribute to the P060A fault code by causing the Engine Light to turn on. This can be due to a faulty Powertrain Control Module (PCM), an open or shorted PCM harness, or a poor electrical connection in the PCM circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors. Additionally, reprogramming the PCM or replacing it may be necessary.
To fix the P060A fault code, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors related to the Powertrain Control Module (PCM). Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. Taking these steps will help identify and resolve the issue causing the Engine Light to turn on.

Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the P060A fault code might be the culprit.
This code can be caused by low battery voltage, a faulty Powertrain Control Module (PCM), an open or shorted PCM harness, or a poor electrical connection.
To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.