The OBD code P054F indicates a problem with the fuel injector circuit.
This affects the fuel injection system.
Symptoms include the Engine Light being ON.
Causes can be contaminated fuel, a faulty fuel injector, open/shorted harness, or poor electrical connection.
It’s a moderate issue.
To fix, inspect wiring and connectors for damage, and check connector pins for any issues.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p054f OBD Code
The vehicle may experience issues related to the exhaust gas temperature sensor circuit high input.
- Symptoms: Engine Light ON.
- Reduced engine power message on the driver information center.
- Loss of power while driving.
- Engine may run rough or stall at idle.
- Turbocharger underboost condition.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p054f OBD Code
P054F code typically indicates an issue with the diesel particulate filter temperature sensor circuit.
- P054F can be caused by a contaminated or improper fuel quality.
- A faulty Fuel Injector.
- An open or shorted Fuel Injector harness.
- A poor electrical connection in the Fuel Injector circuit.
Fixing Error Code p054f Step By Step
To resolve fault code P054F, inspect and potentially replace the intake air heater A control circuit.
- To fix OBDII code P054F, start by reviewing the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the exhaust gas temperature sensor circuit.
- Check for any damaged wires, connectors, or components.
- Inspect the connector pins for any signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the exhaust gas temperature sensor itself.
Cost Of Fixing p054f Fault Code
Diagnosing and repairing fault code P054F may involve inspecting and possibly replacing the intake air heater.
The cost to diagnose and fix OBD code P054F typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p054f OBD Code
P054F code indicates a problem with the diesel particulate filter temperature sensor circuit.
OBD code P054F means that a problem has been detected in the intake air heater A circuit.
This code is triggered by the Engine Control Module (ECM) when it detects a voltage signal outside of the normal range for the intake air heater circuit.
The intake air heater is used to warm up the air entering the engine for better combustion in cold conditions.
When this code sets, it indicates an issue with the intake air heater system, possibly due to a faulty heater element, wiring issue, or a problem with the control module.
Mechanic’s Tech Notes
This code indicates a problem with the intake air heater B circuit.
OBDII code P054F relates to a problem with the transmission control module (TCM) power management.
To diagnose, use a multimeter to check TCM power and ground connections.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect wiring harnesses and connectors for damage, focusing on pin condition for signs of corrosion, bending, or breakage.
This thorough inspection can reveal underlying issues causing the P054F fault code.
FAQ
OBD code P054F indicates a problem with the fuel injector circuit. Check for contaminated fuel, faulty injector, or wiring issues. Inspect and repair as needed.
Common symptoms of OBD code P054F include Engine Light ON, caused by contaminated fuel, faulty fuel injector, open/shorted harness, poor electrical connection. Fix: Inspect and repair related components.
Diagnose and repair OBD code P054F by checking for contaminated fuel, faulty fuel injector, or wiring issues. Inspect harness, connectors, and components for damage or corrosion.
Wrap Up
If your check engine light is on and you’re experiencing issues with the exhaust gas temperature sensor circuit high input, indicated by OBDII code P054F, it could be caused by a faulty exhaust gas temperature sensor, damaged wiring, or poor electrical connections.
To address OBDII code P054F, start by inspecting the exhaust gas temperature sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s resistance and ensure proper electrical connections at the sensor and the engine control module.
Replace the sensor if necessary and repair any damaged wiring to resolve the issue.
