OBD code P0262 indicates an issue with Fuel Injector #1 circuit low.
This affects the fuel injection system.
Symptoms include Engine Light ON, engine misfire, rough running, and decreased fuel efficiency.
Causes may include a dirty or faulty fuel injector, wiring harness issues, or a faulty ECM.
This code should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting and repairing the wiring harness and connectors related to Fuel Injector #1.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p0262 OBD Code
The vehicle may experience a rough idle or lack of power under acceleration with fault code P0262.
- With OBD code P0262, the Engine Light will be ON.
- The engine may misfire intermittently.
- The engine might run rough or feel shaky.
- You may notice a decrease in fuel efficiency.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p0262 OBD Code
P0262 code typically indicates a problem with injector circuit high voltage for cylinder 1.
- P0262 can be caused by a Dirty Fuel Injector 1.
- A Faulty Fuel Injector 1.
- A Plugged Fuel Injector 1.
- A Fuel Injector #1 harness that is open or shorted.
- A Fuel Injector #1 circuit with a poor electrical connection.
- A Faulty Engine Control Module (ECM).
Fixing Error Code p0262 Step By Step
Address the issue with the fuel injector circuit high voltage for fault code P0262.
- To fix OBDII code P0262, first, review the possible causes related to the code.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring, proceed to test the fuel injector for proper operation.
- Replace the faulty fuel injector if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify that the issue has been resolved.
Cost Of Fixing p0262 Fault Code
Diagnosing and repairing fault code P0262 may involve inspecting and replacing the cylinder 1 injector circuit high.
The cost to diagnose and fix OBD code P0262 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p0262 OBD Code
Fault code P0262 relates to cylinder 1 injector circuit low.
OBD code P0262 means that the ECM has detected low voltage in the fuel injector circuit for cylinder 1. This code is triggered by the ECM monitoring the voltage signal from the fuel injector for cylinder 1. When the voltage falls below a specified threshold, the ECM sets code P0262. This code indicates a potential issue with the fuel injector, wiring, or connector related to cylinder 1 in the fuel injection system.
Mechanic’s Tech Notes
Code P0262 indicates a low voltage condition in the fuel injector circuit for cylinder 1.
To diagnose and fix OBDII code P0262, start by checking the wiring harness and connectors related to the injector circuit.
Use a voltmeter to test for proper voltage levels at the injector connector.
Ensure there are no damaged components and inspect connector pins for any issues like being broken, bent, pushed out, or corroded.
Additionally, using a scan tool, monitor injector operation and fuel trim values to pinpoint the exact cause of the issue.
If necessary, perform a continuity test on the injector circuit to identify any wiring faults.
Addressing these potential issues should help resolve the P0262 fault code.
FAQ
Symptoms of OBD code P0262: Engine Light ON, engine misfire, rough running, low MPG. Causes: Dirty/faulty/plugged fuel injector 1, open/shorted harness, poor connection. Fix: Inspect wiring/connectors for damage.
Potential cause of OBD code P0262: Faulty Fuel Injector 1, Plugged Fuel Injector 1, or Fuel Injector #1 circuit poor electrical connection. Inspect wiring and connectors for damage.
Diagnose P0262 by checking Fuel Injector 1 for issues. Inspect wiring and connectors for damage. Repair as needed to resolve engine misfire and rough running.
Wrap Up
If your check engine light is on and your vehicle is experiencing rough idling or decreased engine performance, it could be due to OBDII code P0262. This code typically indicates a problem with the injector circuit for cylinder 1. Possible causes include a faulty fuel injector, wiring issues, or a poor connection at the injector.
To address OBDII code P0262, start by inspecting the wiring harness and connector at the fuel injector for any signs of damage or corrosion.
Test the injector resistance and ensure proper voltage supply.
If necessary, replace the fuel injector and repair any damaged wiring
