OBD code P0244 indicates a turbocharger wastegate solenoid control circuit issue.
This affects the turbocharger system.
Symptoms include the Engine Light being ON.
The cause could be a faulty turbo boost control solenoid valve or related wiring issues.
It’s a moderate issue that may affect engine performance.
To fix, inspect and repair any damaged components or wiring connections related to the turbo boost control solenoid valve.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p0244 OBD Code
The vehicle may experience a lack of power or acceleration under specific driving conditions.
- Symptoms: Engine Light ON.
- Possible lack of engine power under acceleration.
- Turbocharger may not engage properly.
- Whistling or hissing noise from the engine bay.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p0244 OBD Code
P0244 code typically indicates a turbocharger wastegate solenoid performance issue.
- P0244 can be caused by a Faulty Turbo Boost Control Solenoid Valve.
- A Turbo Boost Control Solenoid Valve harness that is open or shorted.
- A Turbo Boost Control Solenoid Valve circuit with poor electrical connection.
- A Faulty Wastegate.
Fixing Error Code p0244 Step By Step
Address the issue by inspecting the wastegate solenoid circuit for potential faults or wiring issues.
- To fix OBDII code P0244, first, review the possible causes related to the wastegate solenoid circuit malfunction.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the wastegate solenoid for proper operation and replace if necessary.
- Clear the fault codes and perform a road test to ensure the issue has been resolved.
Cost Of Fixing p0244 Fault Code
Diagnosing and repairing fault code P0244 typically involves addressing turbocharger wastegate solenoid performance issues.
The cost to diagnose and fix OBD code P0244 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the turbocharger wastegate solenoid circuit issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p0244 OBD Code
P0244 pertains to a turbocharger wastegate solenoid performance issue in the engine.
OBD code P0244 means that the turbocharger wastegate solenoid A has an open circuit.
This code is triggered by the Engine Control Module (ECM) when it detects an open circuit in the wastegate solenoid circuit.
The wastegate solenoid is responsible for controlling the turbocharger wastegate, which regulates the boost pressure produced by the turbocharger.
When the ECM detects an open circuit in the wastegate solenoid circuit, it triggers code P0244.
Mechanic’s Tech Notes
Code P0244 indicates a turbocharger wastegate solenoid performance issue.
To diagnose and fix OBDII code P0244, start by checking the wiring harness and connectors related to the Turbo/Super Charger Wastegate Solenoid.
Use a voltmeter to test for proper voltage levels at the solenoid connector.
Ensure the solenoid is receiving power and ground as per specifications.
Use a scan tool to monitor wastegate solenoid operation and check for any abnormal readings.
If the solenoid is not functioning correctly, it may need to be replaced.
Additionally, inspect the wastegate for any obstructions or malfunctions that could be causing the issue.
FAQ
OBD code P0244 indicates a Turbocharger Wastegate Solenoid A Range/Performance issue. Check and repair turbo boost control solenoid valve, wiring, and connections as needed.
Symptoms of P0244 code: Engine Light ON. Causes: Faulty Turbo Boost Control Solenoid Valve, harness issues. Fix: Inspect wiring, connectors for damage, corrosion.
Diagnose and fix a P0244 code by checking Turbo Boost Control Solenoid Valve and related wiring for faults like open circuits or poor connections.
Wrap Up
If your check engine light is on and your turbocharger isn’t performing as expected, you may be dealing with OBDII code P0244. This code typically indicates a turbocharger wastegate solenoid performance issue due to a faulty wastegate solenoid, wiring problems, or a vacuum leak in the system.
To address OBDII code P0244, start by checking the wastegate solenoid for proper operation and wiring harness for any damage or loose connections.
Test the solenoid and its circuit for continuity and repair or replace any faulty components as needed to
