OBD code P013C indicates an issue with the Heated Oxygen Sensor Bank 2 Sensor 2 circuit.
Symptoms include the Engine Light ON, high fuel consumption, and excessive exhaust smoke.
Causes may include a faulty sensor, wiring issues, fuel system problems, or exhaust leaks.
This code should be addressed promptly to prevent further damage.
A possible fix involves inspecting and repairing the sensor, wiring, and related components.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p013c OBD Code
The vehicle may experience issues related to the oxygen sensor bank 2 sensor 2.
- With OBD code P013C, the Engine Light will be ON.
- High Fuel Consumption can be noticed.
- Excessive Smoke from Exhaust may be present.
Causes of the p013c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code P013C include issues with the oxygen sensor and its circuit.
- P013C can be caused by a faulty Heated Oxygen Bank 2 Sensor 2.
- A Heated Oxygen Bank 2 Sensor 2 harness that is open or shorted.
- A Heated Oxygen Bank 2 Sensor 2 circuit with a poor electrical connection.
- Low or high fuel system pressure.
- Fuel contamination.
- Faulty fuel injectors.
- Exhaust gas leaks.
- Engine vacuum leaks.
Fixing Error Code p013c Step By Step
Replace the oxygen sensor in bank 2 sensor 2 to address fault code P013C.
- To fix OBDII code P013C, start by reviewing the possible causes related to this code.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged components as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- After completing the repair, test drive the vehicle to ensure the code does not return.
Cost Of Fixing p013c Fault Code
The repair for fault code P013C may involve replacing the oxygen sensor in the vehicle.
The cost to diagnose and fix OBD code P013C typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, complexity of the issue, and any additional parts needed for the repair.
Details of the p013c OBD Code
P013C code indicates a fault in the O2 sensor slow response in bank 2, sensor 2.
OBD code P013C means that the O2 sensor slow response for rich to lean bank 2 sensor 2. This code is triggered by the Engine Control Module (ECM) when it detects that the downstream oxygen sensor in bank 2 sensor 2 is responding slowly to changes in the airfuel mixture from rich to lean.
This sensor is typically located after the catalytic converter on the side of the engine with cylinder 2. The ECM monitors this sensor to ensure the catalytic converter is functioning properly and to adjust fuel trim as needed for optimal engine performance and emissions.
Mechanic’s Tech Notes
Code P013C indicates a fault with the oxygen sensor slow response in bank 1 sensor 2.
OBDII code P013C indicates a fault with the oxygen sensor slow response rich to lean bank 2 sensor 2. To diagnose, use a voltmeter to test the oxygen sensor’s signal wire for proper voltage changes.
Check the sensor’s wiring harness and connector for any damage, corrosion, or loose connections.
Scan tools can monitor sensor data to confirm proper operation.
If the sensor is faulty, replacing it is usually the fix.
Ensure the new sensor is compatible with the vehicle’s make and model.
FAQ
OBD code P013C indicates an issue with Heated Oxygen Sensor Bank 2 Sensor 2. Symptoms include Engine Light ON, High Fuel Consumption, and Excessive Smoke.
Common symptoms of OBD code P013C include Engine Light ON, High Fuel Consumption, and Excessive Smoke from Exhaust. Causes may include faulty oxygen sensor or wiring issues.
Diagnose and fix OBD code P013C by checking Bank 2 Sensor 2 and its wiring for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your check engine light is on and you’re experiencing issues with fuel pressure, you may have OBDII code P013C.
This code typically indicates a problem with the oxygen sensor in bank 2, sensor 2. Possible causes include a faulty oxygen sensor, wiring problems, or a poor electrical connection.
To address OBDII code P013C, start by inspecting the wiring harness and connectors for any damage or corrosion.
Test the oxygen sensor’s resistance and voltage output to determine if it needs replacement.
Ensure proper installation and connection of the new sensor to resolve the issue effectively.
