OBD code P0103 indicates a problem with the Mass Air Flow (MAF) sensor circuit.
Symptoms include the Engine Light ON, engine stall, rough running, excessive fuel consumption, or smoke.
Causes may include a dirty air filter, dirty MAF sensor, intake air leaks, or faulty MAF sensor.
It’s a moderate issue that can affect engine performance.
A possible fix is to inspect and clean the MAF sensor, air filter, and related wiring connections for any damage or corrosion.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0103 OBD Code
The vehicle may experience issues related to the mass airflow sensor circuit high input.
- With OBD code P0103, the Engine Light may be ON.
- Engine stall can occur.
- The engine may run rough.
- Excessive fuel consumption may be noticed.
- Excessive smoke from the exhaust can be present.
Causes of the p0103 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P0103 include issues with the MAF sensor or its circuit.
- P0103 can be caused by a Dirty Air Filter.
- A Dirty Mass Air Flow (MAF) Sensor.
- Intake air leaks.
- A Faulty Mass Air Flow Sensor.
- Mass Air Flow Sensor harness is open or shorted.
- Mass Air Flow Sensor circuit poor electrical connection.
Fixing Error Code p0103 Step By Step
Replace faulty MAF sensor to resolve P0103 code.
- To fix OBDII code P0103, first, review the possible causes related to the Mass Air Flow (MAF) sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Reset the vehicle’s Engine Control Module (ECM) to clear the fault code.
- Test drive the vehicle to ensure the code does not return, indicating a successful repair.
Cost Of Fixing p0103 Fault Code
Diagnosing and repairing fault code P0103 typically involves testing and replacing the Mass Air Flow (MAF) sensor.
The cost to diagnose and fix OBD code P0103 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop location, and the complexity of the repair needed.
Details of the p0103 OBD Code
P0103 indicates a high input from the MAF sensor in the vehicle.
OBD code P0103 indicates an issue with the Mass Air Flow (MAF) sensor.
This code is triggered when the MAF sensor is sending a signal to the Engine Control Module (ECM) that is higher than expected.
The ECM uses the MAF sensor signal to calculate the amount of air entering the engine, which is crucial for determining the correct airfuel mixture.
When the MAF sensor signal is higher than expected, it can lead to drivability issues such as rough idling, hesitation, or stalling.
Mechanic’s Tech Notes
Troubleshooting for fault code P0103 involves diagnosing issues with the MAF sensor circuit.
To diagnose and fix OBDII code P0103, which indicates an issue with the Mass Air Flow (MAF) sensor circuit high input, start by checking the MAF sensor’s wiring harness and connector for any damage or corrosion.
Use a voltmeter to test the MAF sensor’s power and ground connections for proper voltage levels.
Scan tools can help monitor MAF sensor data to see if it responds correctly.
If the wiring and connections are intact, the MAF sensor itself may be faulty and require replacement.
Ensure the air filter is clean and there are no air leaks in the intake system affecting MAF sensor readings.
FAQ
Common symptoms of OBD code P0103 include Engine Light ON, engine stall, rough running, excessive fuel consumption, and smoke. Causes may include dirty air filter or faulty MAF sensor. Fix: Check and clean MAF sensor, air filter, and inspect related wiring for damage.
Typical cause of OBD code P0103: Dirty Mass Air Flow (MAF) Sensor, faulty MAF sensor, or issues with MAF sensor circuit/connection. Check wiring and connectors for damage.
Diagnose and repair OBD code P0103 by checking for dirty air filter, MAF sensor issues, intake leaks, or faulty wiring/connectors. Inspect and repair as needed.

Wrap Up
If your check engine light is on and your vehicle is experiencing issues with the Mass Air Flow (MAF) sensor, you may see OBDII code P0103. This code typically indicates a high voltage output from the MAF sensor, which can be caused by a faulty MAF sensor, a problem with the sensor wiring, or a poor connection at the MAF sensor connector.
To address OBDII code P0103, start by inspecting the MAF sensor wiring for any signs of damage or corrosion.
Check the MAF sensor connector for a secure connection and proper pin fitment