OBD code P0102 indicates a problem with the Mass Air Flow (MAF) sensor circuit.
Symptoms include the Engine Light ON, engine stall, rough running, excessive fuel consumption, or smoke.
Causes may include a dirty air filter, dirty MAF sensor, intake air leaks, faulty MAF sensor, or wiring issues.
This issue should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting and cleaning the MAF sensor, air filter, and checking for any wiring issues.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0102 OBD Code
The vehicle may experience low voltage readings from the mass airflow sensor circuit (P0102).
- With OBD code P0102, the symptoms may include: Engine Light ON.
- Engine stall.
- Engine running rough.
- Excessive fuel consumption.
- Excessive smoke.
Causes of the p0102 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P0102 include issues with the MAF sensor or its circuit.
- P0102 can be caused by a Dirty Air Filter.
- A Dirty Mass Air Flow (MAF) Sensor.
- Intake air leaks.
- A Faulty Mass Air Flow Sensor.
- A Mass Air Flow Sensor harness that is open or shorted.
- A Mass Air Flow Sensor circuit with a poor electrical connection.
Fixing Error Code p0102 Step By Step
Replace faulty MAF sensor to resolve P0102 code.
- To fix OBDII code P0102, first, review the possible causes related to the Mass Air Flow (MAF) sensor circuit.
- Visually inspect the MAF sensor wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Clean the MAF sensor using an appropriate cleaner.
- Reset the fault codes and perform a test drive to see if the code returns.
- If the issue persists, consider replacing the MAF sensor with a new one.
Cost Of Fixing p0102 Fault Code
Diagnosing and repairing fault code P0102 typically involves testing and replacing the faulty mass airflow sensor.
The cost to diagnose and fix OBD code P0102 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair.
Details of the p0102 OBD Code
P0102 indicates a low voltage condition in the mass airflow sensor circuit.
OBD code P0102 means that the Mass Air Flow (MAF) sensor is reading a low voltage input.
This code is triggered by the Engine Control Module (ECM) when it detects that the MAF sensor signal is below the expected range.
The MAF sensor is a key component in measuring the amount of air entering the engine, which is crucial for determining the correct airfuel mixture for combustion.
When the MAF sensor signal is low, it can lead to issues such as poor fuel economy, lack of power, and rough idling.
Mechanic’s Tech Notes
Code P0102 indicates a low voltage signal from the mass airflow sensor (MAF) in the vehicle.
To diagnose and fix OBDII code P0102 (Mass or Volume Air Flow Circuit Low Input), start by checking the MAF sensor’s power and ground with a voltmeter.
Inspect the sensor’s wiring harness and connector for any damage, corrosion, or loose connections.
Clean or repair as needed.
Use a scan tool to monitor MAF sensor data while the engine is running to ensure it’s within specifications.
If the sensor readings are abnormal, consider replacing the MAF sensor.
Additionally, check for any intake air leaks that could affect sensor readings.
Clear the code after repairs and recheck to confirm the issue is resolved.
FAQ
Common symptoms of OBD code P0102 include Engine Light ON, engine stall, rough running, excessive fuel consumption, and smoke. Causes may include dirty air filter or faulty MAF sensor. Fix: Inspect and clean MAF sensor, air filter, and check for intake leaks.
The typical cause of OBD code P0102 is a dirty or faulty Mass Air Flow (MAF) sensor. Check sensor, air filter, intake leaks, and wiring connections.
Diagnose and repair OBD code P0102 by checking for dirty air filter, MAF sensor issues, intake leaks, or faulty wiring connections. Inspect components and connectors for damage.
Wrap Up
If your check engine light is on and you’re experiencing issues with the Mass Air Flow (MAF) sensor, you might see OBDII code P0102. This code typically indicates a problem with the MAF sensor circuit low input.
Possible causes include a faulty MAF sensor, damaged wiring or connectors, or a clogged air filter restricting airflow.
To address OBDII code P0102, start by inspecting the MAF sensor wiring and connector for any signs of damage or corrosion.
Test the MAF sensor using a multimeter to ensure it is functioning correctly.
If necessary,
