OBD code P0092 indicates a fault with the fuel pressure sensor circuit.
This affects the fuel system.
Symptoms include the Engine Light being ON.
Common causes are a faulty fuel pressure sensor or issues with its wiring/connectors.
While not a severe issue, it can affect engine performance.
To fix, inspect the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p0092 OBD Code
The vehicle may experience issues related to fuel pressure with fault code P0092.
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Engine may run rough or stall at idle.
- Fuel efficiency may decrease.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p0092 OBD Code
Possible reasons for fault code P0092 include issues with the fuel pressure regulator or fuel pump.
- P0092 can be caused by a faulty fuel pressure sensor.
- A fuel pressure sensor harness that is open or shorted.
- A fuel pressure sensor electrical circuit with poor connection.
- A faulty Engine Control Module (ECM).
Fixing Error Code p0092 Step By Step
Address the fuel pressure regulator control circuit low voltage issue indicated by fault code P0092.
- To fix OBDII code P0092, review the possible causes related to the fuel pressure regulator control circuit high.
- Visually examine the wiring harness and connectors associated with the fuel pressure regulator.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the fuel pressure regulator and its control circuit for proper operation.
- Replace the fuel pressure regulator if it is faulty.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Road test the vehicle to ensure the issue has been resolved.
Cost Of Fixing p0092 Fault Code
Diagnosing and repairing fault code P0092 typically involves inspecting and testing the fuel pressure regulator circuit.
The cost to diagnose and fix OBD code P0092 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p0092 OBD Code
P0092 indicates a fuel pressure regulator control circuit low.
OBD code P0092 means that the fuel pressure regulator control circuit is low.
This code is triggered by the Engine Control Module (ECM) when it detects that the voltage signal from the fuel pressure regulator control circuit is lower than the specified range.
This can indicate issues with the fuel pressure regulator, wiring, or connectors related to the fuel system.
Mechanic’s Tech Notes
Code P0092 indicates a fuel pressure regulator control circuit low.
OBDII code P0092 indicates an issue with the fuel pressure regulator control circuit.
To diagnose, use a voltmeter to check the voltage at the fuel pressure regulator and its wiring.
Scan tools can monitor fuel pressure sensor data for abnormalities.
Inspect the wiring harness and connectors for damage, corrosion, or loose connections.
Ensure the fuel pressure regulator is functioning correctly.
If no visible issues are found, consider testing the fuel pressure sensor and related components.
Reflashing the engine control module may be necessary if all other components check out.
FAQ
Common symptoms of OBD code P0092 include Engine Light ON, caused by a faulty fuel pressure sensor, harness issues, or ECM problems. Inspect and repair related components.
OBD code P0092 is typically caused by a faulty fuel pressure sensor, open/shorted sensor harness, poor electrical connection, or faulty ECM. Inspect and repair as needed.
Diagnose and repair OBD code P0092 by checking fuel pressure sensor, harness, and ECM. Inspect wiring for damage or poor connections.
Wrap Up
If your check engine light is on and you’re experiencing fuel pressure regulator control circuit low issues indicated by OBDII code P0092, it could be caused by a faulty fuel pressure regulator, damaged wiring or connectors, or a problem with the fuel pressure sensor.
To address OBDII code P0092, start by inspecting the wiring and connectors related to the fuel pressure regulator and sensor.
Test the fuel pressure sensor for proper operation and replace any damaged components as needed to ensure accurate fuel pressure regulation.
