The OBD code P006A indicates a performance issue with the Manifold Absolute Pressure (MAP) sensor.
Symptoms include the Engine Light being ON.
Common causes are a faulty MAP sensor, open/shorted sensor harness, or poor electrical connection.
This issue should be addressed promptly to prevent potential drivability issues.
A possible fix is to inspect and repair any damaged wiring or connectors related to the MAP sensor.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p006a OBD Code
The vehicle may experience a lack of power or poor acceleration with fault code P006A.
- Symptoms: Engine Light ON.
- Reduced engine performance.
- Rough idling.
- Hesitation during acceleration.
- Increased fuel consumption.
Causes of the p006a OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P006A include issues with the manifold absolute pressure sensor.
- P006A can be caused by a faulty MAF or MAP sensor.
- A MAF or MAP sensor harness that is open or shorted.
- A MAF or MAP sensor circuit with poor electrical connection.
Fixing Error Code p006a Step By Step
Address the issue by inspecting the MAP sensor and its wiring for any faults or damage.
- To fix OBDII code P006A, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the MAP sensor circuit.
- Check for any damaged wires, loose connections, or corrosion.
- Ensure to examine the connector pins for any signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify if the issue has been resolved.
Cost Of Fixing p006a Fault Code
Diagnosing and repairing fault code P006A typically involves inspecting and possibly replacing the manifold absolute pressure sensor.
The cost to diagnose and fix OBD code P006A depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates, complexity of the issue, and any additional parts needed for the repair.
Details of the p006a OBD Code
P006A code indicates a Manifold Absolute Pressure/Mass Airflow Throttle Position Correlation.
OBD code P006A means that a Manifold Absolute Pressure/Mass Air Flow Throttle Position Correlation error has been detected.
This code is triggered by the Engine Control Module (ECM) when it detects a discrepancy between the Manifold Absolute Pressure (MAP) sensor, Mass Air Flow (MAF) sensor, and Throttle Position Sensor (TPS) readings.
This error typically indicates a problem with the correlation between the intake air pressure, mass air flow rate, and throttle position in the engine.
It can be caused by issues such as a faulty MAP sensor, MAF sensor, TPS, vacuum leaks, or wiring/connectivity problems between these sensors and the ECM.
Proper diagnosis using a scan tool and multimeter is necessary to pinpoint the exact cause of the P006A fault code.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing code P006A related to the manifold absolute pressure sensor.
To diagnose and fix OBDII code P006A, start by checking the TCM power and ground using a multimeter.
Verify TCM response over the CAN network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P006A fault code.
FAQ
Common symptoms of OBD code P006A include Engine Light ON, caused by faulty MAF or MAP sensor, open/shorted harness, or poor electrical connection. Fix by inspecting wiring and connectors.
OBD code P006A is typically caused by a faulty MAF or MAP sensor, open/shorted harness, or poor electrical connection. Inspect and repair sensor and wiring connections.
Diagnose and repair OBD code P006A by checking for faulty MAF or MAP sensor, open/shorted harness, or poor connections. Inspect wiring and connectors for damage.

Wrap Up
If your check engine light is on and your vehicle is experiencing issues with the intake manifold pressure, you may have OBDII code P006A.
This could be caused by a faulty intake manifold pressure sensor, a vacuum leak in the intake system, or a problem with the wiring harness connected to the sensor.
To address OBDII code P006A, start by inspecting the intake manifold pressure sensor and its wiring harness for any visible damage or loose connections.
Test the sensor’s functionality and check for any vacuum leaks in the intake system.
Replace the sensor if necessary and repair any damaged wiring or