OBD code P0062 indicates a problem with the Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty sensor, wiring issues, or a malfunctioning Engine Control Module (ECM).
While not an immediate threat, it can affect vehicle performance.
To fix it, inspect the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the p0062 OBD Code
The vehicle may experience issues related to the oxygen sensor heater circuit malfunction (P0062).
- Symptoms: Engine Light ON.
- Reduced engine performance.
- Hesitation during acceleration.
- Increased fuel consumption.
Causes of the p0062 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P0062 code typically indicates an issue with the heater control circuit of the oxygen sensor.
- P0062 can be caused by a faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3.
- A Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 harness that is open or shorted.
- A poor electrical connection in the Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit.
- A blown fuse in the Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit.
- Or a faulty Engine Control Module (ECM).
Fixing Error Code p0062 Step By Step
Address the issue by inspecting the MAP sensor and its wiring for any faults or damage.
- To fix OBDII code P0062, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the intake air temperature sensor for proper operation and replace it if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to verify that the code does not return, indicating a successful repair.
Cost Of Fixing p0062 Fault Code
Diagnosing and repairing fault code P0062 typically involves testing and replacing the manifold absolute pressure sensor.
The cost to diagnose and fix OBD code P0062 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p0062 OBD Code
P0062 code relates to a problem with the heater control circuit for the oxygen sensor.
OBD code P0062 means that the heater circuit for the oxygen sensor in Bank 2 Sensor 3 is malfunctioning.
This code is triggered by the Engine Control Module (ECM) when it detects a low voltage condition in the heater circuit of the oxygen sensor located after the catalytic converter on Bank 2 of the engine.
The ECM monitors the voltage signal to ensure proper operation of the oxygen sensor heater circuit, which is essential for accurate fuel control and emissions reduction.
Mechanic’s Tech Notes
Code P0062 indicates a problem with the heater control circuit in the HO2S sensor.
OBDII code P0062 relates to a problem with the heater control circuit in the oxygen sensor located in bank 2, sensor 3. To diagnose this issue, you can use a multimeter to check the heater circuit’s resistance and voltage.
Ensure the sensor is receiving power and ground.
Scan tools can help monitor sensor data and confirm proper operation.
Visually inspect the sensor and its wiring for any damage or corrosion.
If no visible issues are found, consider replacing the oxygen sensor.
Remember to clear the code after repairs and perform a test drive to ensure the problem is resolved.
FAQ
Common symptoms of OBD code P0062 include Engine Light ON, caused by issues with Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit. Fix involves inspecting wiring and connectors.
Typical cause of OBD code P0062 is a faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code P0062 by checking Bank 2 Sensor 3 H2OS and related components for faults. Inspect wiring, connectors, and ECM for issues.
Wrap Up
If your vehicle displays OBDII code P0062 along with poor engine performance and reduced fuel efficiency, it may indicate a problem with the heater control circuit for the oxygen sensor bank 2 sensor 3. This could be caused by a faulty oxygen sensor, damaged wiring, or a poor electrical connection.
To address OBDII code P0062, start by inspecting the wiring harness and connectors related to the oxygen sensor bank 2 sensor 3. Test the sensor’s resistance and voltage output to determine if it needs replacement.
Ensure all connections are secure and free of corrosion or damage.
