The OBD code P0017 indicates a Crankshaft Position Exhaust Camshaft Position Correlation error.
It affects the Exhaust Camshaft Position Sensor in the engine.
Symptoms include the Engine Light ON, hard starting, and stalling while driving.
Causes may include low oil level, timing chain issues, or sensor faults.
It’s a moderate issue that needs attention.
A possible fix involves checking wiring, connectors, and sensor functionality.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0017 OBD Code
The engine may run rough or have poor acceleration with fault code P0017.
- With OBD code P0017, the Engine Light will be ON.
- Engine may be hard to start.
- Engine may stall while driving.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p0017 OBD Code
P0017 code typically indicates a problem with the correlation between the crankshaft and camshaft positions.
- P0017 can be caused by low oil level.
- A mechanical timing fault such as a stretched timing chain or damaged timing chain tensioner.
- A blocked oil passage.
- A faulty Exhaust (‘B’) Camshaft Position (CMP) Sensor.
- A faulty Crankshaft Position (CKP) Sensor.
Fixing Error Code p0017 Step By Step
Address the P0017 code by inspecting the camshaft position sensor and timing chain alignment.
- To fix OBDII code P0017, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the engine oil level and condition, ensuring it is clean and at the correct level.
- Then, inspect the camshaft position sensor and crankshaft position sensor for proper operation and connection.
- If no issues are found with the sensors, consider replacing the camshaft position sensor or the crankshaft position sensor as needed.
- Finally, clear the fault codes with a scan tool and test drive the vehicle to verify that the P0017 code does not return.
Cost Of Fixing p0017 Fault Code
The repair for fault code P0017 typically involves addressing issues with the camshaft position sensor.
The cost to diagnose and fix OBD code P0017 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair.
Details of the p0017 OBD Code
Code P0017 indicates a correlation problem between the crankshaft and exhaust camshaft position sensors.
OBD code P0017 means that the ECM has detected that the crankshaft and camshaft position sensor signals are out of sync.
This is typically triggered by a mechanical issue in the engine, such as a stretched timing chain or belt, a faulty camshaft phaser, or a problem with the camshaft or crankshaft position sensors themselves.
The signal or system involved in this fault code is the relationship between the crankshaft and camshaft positions, which is crucial for proper engine operation and timing.
Mechanic’s Tech Notes
Code P0017 indicates a correlation problem between the crankshaft and exhaust camshaft position sensors.
To diagnose and fix OBDII code P0017, start by checking the camshaft position sensor’s wiring harness and connectors for any damage or corrosion.
Use a voltmeter to test the sensor’s power and ground connections.
Verify the sensor’s operation using a scan tool to ensure it’s sending the correct signals.
If the sensor is functioning correctly, inspect the camshaft phaser for any mechanical issues.
Consider performing an engine timing check to rule out any timing chain or belt problems.
If all checks out, the issue may lie with the engine control module (ECM) needing reprogramming or replacement.
FAQ
Common causes of OBD code P0017 include low oil level, mechanical timing fault, blocked oil passage, faulty Exhaust Camshaft Position Sensor, or faulty Crankshaft Position Sensor.
OBD code P0017 indicates a serious issue like a stretched timing chain. Continuing to drive can cause further engine damage. Address promptly to prevent costly repairs.
Typical symptoms of OBD code P0017 include Engine Light ON, hard starting, stalling. Causes: Low oil, timing issues, sensor faults. Fix: Check wiring, connectors, components for damage.
Wrap Up
If your check engine light is on and you’re experiencing rough idling or poor acceleration, OBDII code P0017 may indicate issues with the camshaft position sensor, crankshaft position sensor, or their wiring.
This code commonly points to incorrect timing between the two shafts, possibly due to a faulty sensor or wiring problem.
To address OBDII code P0017, start by inspecting the camshaft and crankshaft position sensors for proper operation and connection.
Check the wiring harness for any signs of damage, corrosion, or loose connections.
Consider replacing any faulty sensors and repairing or replacing
