The OBD code P0301 for Nissan indicates a misfire in cylinder 1. This affects the engine’s performance, causing symptoms like engine light on, lack of power, hard starting, and hesitation.
Common causes include a faulty spark plug, clogged fuel injector, or ignition coil issues.
While not an immediate danger, it can lead to further engine damage if left unresolved.
To fix it, inspect and potentially replace the spark plug, fuel injector, or ignition coil, and check related wiring for any issues.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Nissan p0301 OBD Code
The vehicle may experience rough idling or a noticeable lack of power under load.
- With Nissan OBD code P0301, the Service Engine Soon Warning Light may illuminate.
- Lack/loss of power can be experienced while driving.
- Hard starting the engine might occur.
- Engine hesitation may be noticeable during acceleration.
Causes of the Nissan p0301 OBD Code
Fault code P0301 on a Nissan indicates a misfire in cylinder 1.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- P0301 can be caused by: Faulty Spark Plug #1.
- Clogged or faulty Fuel Injector #1.
- Faulty Ignition Coil #1.
- Fuel Injector #1 harness is open or shorted.
- Fuel Injector #1 circuit poor electrical connection.
- Ignition Coil #1 harness is open or shorted.
- Ignition Coil #1 circuit poor electrical connection.
- Insufficient cylinder 1 compression.
- Incorrect fuel pressure.
- Intake air leak.
Fixing Nissan Error Code p0301 Step By Step
Address the misfire issue on cylinder 1 in a Nissan by checking spark plugs and ignition components.
- To fix the Nissan OBDII code P0301, start by reviewing the possible causes related to cylinder 1 misfire.
- Visually inspect the ignition system components such as spark plugs, ignition coils, and spark plug wires for any signs of wear or damage.
- Check the fuel injector for proper operation and ensure it is delivering fuel correctly to cylinder 1.
- Test the compression in cylinder 1 to verify the engine’s mechanical condition.
- If all components check out, consider swapping the ignition coil from cylinder 1 with another cylinder to see if the misfire follows.
- Finally, reset the ECU to clear the code and see if the misfire returns.
Cost Of Fixing Nissan p0301 Fault Code
The repair for Nissan P0301 may involve replacing the spark plug, ignition coil, or addressing vacuum leaks.
The cost to diagnose and fix a Nissan OBD code P0301 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the Nissan p0301 OBD Code
Nissan code P0301 indicates a misfire in cylinder 1.
Code P0301 means a misfire was detected in cylinder 1 of the engine.
It’s triggered by the Engine Control Module (ECM) based on variations in crankshaft speed that indicate a misfire in that specific cylinder.
This code is specific to cylinder 1, and it indicates that there was a misfire detected during the engine’s operation.
Mechanic’s Tech Notes
For Nissan code P0301, check cylinder 1 for misfire caused by spark plug, ignition coil, or fuel injector issues.
To diagnose and fix OBDII code P0301 on a Nissan, start by checking the ignition system components like spark plugs, ignition coils, and spark plug wires for any issues.
Use a voltmeter to test the ignition coil for proper voltage supply.
Inspect the fuel injector for clogging or malfunction.
Perform a compression test to check the engine’s mechanical condition.
Additionally, check for vacuum leaks that could affect cylinder #1. Reset the code after addressing any identified issues and monitor for recurrence.
If the problem persists, further diagnostics with a scan tool may be necessary to pinpoint the exact cause.
FAQ
Common causes of OBD code P0301 in a Nissan: Faulty Spark Plug #1, Clogged Fuel Injector #1, Faulty Ignition Coil #1, or Ignition Coil #1 circuit/connection issues.
Diagnose P0301 misfire in Nissan: Check spark plug, fuel injector, ignition coil #1. Inspect wiring for damage, connector pins for issues.
It is not safe to continue driving with OBD code P0301 on your Nissan. Address the causes listed, focusing on Spark Plug #1, Fuel Injector #1, and Ignition Coil #1.

Wrap Up
If your Nissan is displaying OBD code P0301 and experiencing rough idle or misfires, it may be caused by a faulty ignition coil, spark plug, fuel injector, or vacuum leak affecting cylinder 1. To address Nissan OBD code P0301, check and replace the spark plug, ignition coil, or fuel injector for cylinder 1. Inspect the wiring harness and connectors for any damage or corrosion that could be affecting the components’ performance.