[SOLVED] Lincoln P013C Code: Fast Fix For Slow Oxygen Sensor

The OBD code P013C for a Lincoln indicates an issue with the Heated Oxygen Sensor Bank 2 Sensor 2. Symptoms include the Engine Light ON, high fuel consumption, and excessive exhaust smoke.

This code is usually caused by a faulty sensor, wiring harness issues, fuel pressure problems, faulty injectors, or exhaust leaks.

It’s important to address this code promptly to prevent further damage.

A possible fix involves inspecting and repairing the sensor, wiring, and related components.

Repair Importance Level	6.67 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

Symptoms of the Lincoln p013c OBD Code

The Lincoln with fault code P013C may exhibit issues related to the oxygen sensor bank 2 sensor 2.

With OBD code P013C on a Lincoln, the Engine Light will be ON.
High Fuel Consumption can be noticed.
Excessive Smoke from Exhaust may be present.

Causes of the Lincoln p013c OBD Code

Possible triggers for Lincoln fault code P013C include oxygen sensor issues or wiring faults.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P013C in a Lincoln can be caused by a Faulty Heated Oxygen Bank 2 Sensor 2.
A Heated Oxygen Bank 2 Sensor 2 harness that is open or shorted.
A Heated Oxygen Bank 2 Sensor 2 circuit with poor electrical connection.
Inappropriate fuel pressure.
Faulty fuel injectors.
Exhaust leaks before or near the Heated Oxygen Bank 2 Sensor 2.

Fixing Lincoln Error Code p013c Step By Step

To address fault code P013C on a Lincoln, inspect and potentially replace the O2 sensor.

To fix the Lincoln OBDII code P013C, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the oxygen sensor for proper operation and replace if necessary.
Clear the fault code from the vehicle’s computer using a scan tool.
Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.

Cost Of Fixing Lincoln p013c Fault Code

Diagnosing and repairing fault code P013C on a Lincoln involves testing and potentially replacing the oxygen sensor.

The cost to diagnose and fix the Lincoln OBD code P013C depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost will likely be between $75 and $150, depending on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Lincoln p013c OBD Code

The Lincoln P013C code indicates a fault in the O2 sensor slow response bank 2 sensor 2.

OBD code P013C for a Lincoln indicates a fault with the O2 sensor slow response rich to lean in bank 2 sensor 2. This code is triggered by the Engine Control Module (ECM) when it detects that the downstream oxygen sensor in bank 2 is responding slowly as it switches from a rich to lean condition.

This sensor is typically located after the catalytic converter in bank 2 of the exhaust system.

The ECM monitors this sensor to ensure the catalytic converter is functioning properly and to adjust fuel trim accordingly for optimal engine performance and emissions.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Lincoln fault code P013C related to the O2 sensor.

OBDII code P013C in a Lincoln typically indicates an issue with the oxygen sensor slow response bank 2 sensor 2. To diagnose, start by visually inspecting the wiring harness and connectors for any damage or corrosion.

Use a voltmeter to check the sensor’s voltage output and response time.

A scan tool can help monitor the sensor’s activity and response over time.

If the sensor is slow to respond, it may need replacement.

Ensure the sensor is receiving proper voltage and ground.

Reflashing the vehicle’s ECM may also be necessary to clear the fault code.

FAQ

1. What does OBD code P013C mean in a Lincoln vehicle?

OBD code P013C in a Lincoln means an issue with Heated Oxygen Sensor Bank 2 Sensor 2. Check sensor, wiring, fuel pressure, injectors, and exhaust for faults.

2. What are the common symptoms associated with fault code P013C in a Lincoln?

Common symptoms for fault code P013C in a Lincoln include Engine Light ON, High Fuel Consumption, Excessive Smoke from Exhaust. Causes: Faulty Heated Oxygen Sensor. Fix: Inspect wiring and connectors.

3. How can I diagnose and repair OBD code P013C in my Lincoln vehicle?

Diagnose P013C in Lincoln: Check Bank 2 Sensor 2, wiring, connectors for faults. Inspect fuel system, exhaust leaks. Repair as needed.

Lincoln p013c error fault code explained

Wrap Up

If your Lincoln is displaying OBD code p013c, you may experience poor engine performance, rough idling, or decreased fuel efficiency.

This code typically indicates a fault with the oxygen sensor in bank 2, sensor 2. Possible causes include a faulty oxygen sensor, wiring issues, or a vacuum leak affecting sensor readings.

To address Lincoln OBD code p013c, start by inspecting the oxygen sensor in bank 2, sensor 2, and its wiring harness for any signs of damage or corrosion.

Test the sensor’s functionality and replace it if necessary.

Ensure the sensor is receiving