[SOLVED] Kia P0717 Code: Fast Fix For Turbine Speed Sensor

The OBD code P0717 for Kia indicates a problem with the Transmission Input Speed Sensor Circuit No Signal.

This affects the transmission system.

Symptoms include the Engine Light ON, transmission issues.

The cause could be a faulty transmission speed sensor, open/shorted sensor harness, or poor electrical connection.

It’s a moderate issue.

A possible fix is to inspect the sensor, wiring harness, and connectors for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Kia p0717 OBD Code

The vehicle may experience shifting issues or erratic speedometer readings with fault code P0717 on a Kia.

With Kia OBD code P0717, the Engine Light will be ON.
Transmission may have issues.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Kia p0717 OBD Code

P0717 in a Kia typically indicates a problem with the input speed sensor circuit.

P0717 can be caused by a Faulty Transmission Speed Sensor.
A Transmission Speed Sensor harness that is open or shorted.
A Transmission Speed Sensor circuit with poor electrical connection.

Fixing Kia Error Code p0717 Step By Step

Replace the input speed sensor in the transmission to address Kia fault code P0717.

To fix the Kia OBDII code P0717, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the transmission input speed sensor for proper operation and connection.
Replace the transmission input speed sensor if necessary.
Clear the fault codes from the vehicle’s computer using a scan tool.
Test drive the vehicle to ensure the code does not return.

Cost Of Fixing Kia p0717 Fault Code

Diagnosing and repairing Kia fault code P0717 typically involves inspecting and replacing the input speed sensor.

The cost to diagnose and fix a Kia OBD code P0717 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.

Factors like shop rates and complexity of the repair can influence the final cost.

Details of the Kia p0717 OBD Code

Kia P0717 code indicates a problem with the input speed sensor circuit in the transmission.

OBD code P0717 for Kia vehicles indicates a transmission input speed sensor circuit no signal.

This means that the ECM has not received a signal from the transmission input speed sensor.

The transmission input speed sensor is the component that triggers this fault code.

It is responsible for monitoring the speed of the input shaft into the transmission.

When the sensor fails to send a signal to the ECM, code P0717 is set.

This code is related to the transmission system and can affect the vehicle’s shifting performance.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing fault code P0717 in Kia vehicles.

To diagnose and fix OBDII code P0717 in a Kia, start by checking the transmission control module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough examination will help identify and address the root cause of the P0717 code.

FAQ

1. What does OBD code P0717 mean in a Kia vehicle?

OBD code P0717 in a Kia means a Transmission Input Speed Sensor Circuit No Signal. Symptoms include Engine Light ON and transmission issues. Check sensor and wiring for faults.

2. What are the common symptoms associated with OBD code P0717 in a Kia?

Common symptoms of OBD code P0717 in a Kia include Engine Light ON, transmission issues. Causes may be a faulty transmission speed sensor or related wiring issues. Fix: Inspect and repair as needed.

3. How can I diagnose and repair OBD code P0717 in my Kia vehicle?

Diagnose and repair OBD code P0717 in your Kia by checking the transmission speed sensor, harness, and connections for faults. Repair as needed.

Wrap Up

If your Kia is displaying OBD code P0717 and experiencing harsh shifting, slipping transmission, or delayed engagement, it may be caused by a faulty input speed sensor, damaged wiring harness, low transmission fluid level, or a malfunctioning TCM (Transmission Control Module).

To address Kia OBD code P0717, start by inspecting the input speed sensor and its wiring for any signs of damage or corrosion.

Check the transmission fluid level and quality, ensuring it meets manufacturer specifications.

If no issues are found, consider testing the TCM and related connectors for proper operation.