[SOLVED] Kia P0365 Code: Fast Fix For Camshaft Position Sensor Circuit

The OBD code P0365 for Kia indicates a problem with the Camshaft Position Sensor B Circuit.

Symptoms include the Engine Light ON, lack of power, and engine stalling.

Common causes are a faulty camshaft position sensor, wiring issues, or a weak battery.

This issue should be addressed promptly to prevent further engine problems.

A possible fix involves inspecting and repairing the sensor, wiring, and connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	6.67 (Out of 10)

Symptoms of the Kia p0365 OBD Code

The vehicle may experience issues related to the camshaft position sensor circuit malfunction (P0365).

With OBD code P0365 on a Kia, symptoms may include: Engine Light ON.
Lack/Loss of Power.
Engine Stall.

Causes of the Kia p0365 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Kia fault code P0365 include faulty camshaft position sensor or wiring issues.

P0365 can be caused by a Faulty Camshaft Position Sensor.
A Camshaft Position Sensor harness that is open or shorted.
A Camshaft Position Sensor circuit with poor electrical connection.
A Faulty starter motor.
A Starting system circuit issue.
A Dead (Weak) battery.

Fixing Kia Error Code p0365 Step By Step

Replace the faulty camshaft position sensor to address Kia fault code P0365.

To fix the Kia OBDII code P0365, first, review the possible causes related to the camshaft position sensor circuit.
Visually examine the wiring harness and connectors for any damage.
Check the connector pins for signs of being broken, bent, pushed out, or corroded.
Replace the camshaft position sensor if necessary.
Clear the fault codes and perform a test drive to verify the repair.

Cost Of Fixing Kia p0365 Fault Code

The repair for Kia fault code P0365 typically involves replacing the camshaft position sensor.

The cost to diagnose and fix a Kia OBD code P0365 typically ranges from $75 to $150, based on a labor rate of 1. 0 hour.

The total cost depends on shop rates, complexity of the issue, and any additional parts or services needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Kia p0365 OBD Code

Kia fault code P0365 relates to an issue with the camshaft position sensor B circuit.

OBD code P0365 for Kia vehicles indicates a malfunction in the camshaft position sensor B circuit bank 1. This code is triggered by the Engine Control Module (ECM) when it detects an incorrect signal from the camshaft position sensor B for bank 1. The camshaft position sensor helps the ECM determine the position of the camshaft in relation to the crankshaft for proper engine operation.

If the signal from the sensor is erratic or out of range, the ECM will set code P0365.

Mechanic’s Tech Notes

Detailed information on Kia fault code P0365, including symptoms, causes, and repair procedures.

To diagnose and fix OBDII code P0365 in a Kia, start by visually inspecting the wiring harness and connectors related to the camshaft position sensor.

Look for any damage or corrosion.

Use a voltmeter to check for proper voltage at the sensor connector.

Scan tools can help verify sensor data and communication over the network.

If no issues are found during visual inspection, consider testing the camshaft position sensor itself for proper operation.

Reflashing the engine control module may also be necessary to resolve the fault code.

FAQ

1. What are the common symptoms associated with OBD code P0365 in a Kia vehicle?

Common symptoms of OBD code P0365 in a Kia: Engine Light ON, lack of power, engine stall. Causes: Faulty camshaft position sensor, wiring issues. Fix: Inspect sensor and wiring for damage.

2. What is the typical cause of OBD code P0365 in a Kia vehicle?

The typical cause of OBD code P0365 in a Kia vehicle is a faulty camshaft position sensor, open/shorted harness, poor electrical connection.

3. How can I diagnose and repair OBD code P0365 in my Kia vehicle?

Diagnose and repair OBD code P0365 in your Kia by checking the camshaft position sensor, wiring harness, connectors, and related components for faults or damage.

Wrap Up

If your Kia is displaying OBD code P0365 and experiencing rough idling or stalling, it may be caused by a faulty camshaft position sensor or issues with the sensor circuit wiring.

This code indicates a problem with the camshaft position sensor B circuit.

To address Kia OBD code P0365, start by inspecting the camshaft position sensor B and its wiring harness for any visible damage or loose connections.

Test the sensor’s electrical connectors for proper voltage and continuity.

If necessary, replace the camshaft position sensor and repair any damaged wiring to resolve the issue.