[SOLVED] Kia P0024 Code: Fast Fix For 'b' Camshaft Overadvanced

The OBD code P0024 for Kia indicates a camshaft position timing overadvanced or system performance issue.

It affects the camshaft position actuator control circuit in bank 2. Symptoms include the engine light on, lack of power, and rough idle.

Causes may include dirty engine oil, low oil level, faulty camshaft actuator, or engine mechanical problems.

This issue should be addressed promptly to prevent further engine damage.

A possible fix is to inspect the wiring harness, connectors, and components for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Kia p0024 OBD Code

The Kia P0024 fault code typically triggers when there is an issue with the camshaft position.

With OBD code P0024 on a Kia, you may notice the Engine Light ON.
Experience a Lack/Loss of power.
Notice Engine rough idle.

Causes of the Kia p0024 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P0024 in a Kia typically indicates a problem with the camshaft position timing overadvanced.

P0024 can be caused by dirty engine oil.
Low engine oil level.
A faulty camshaft actuator.
Engine mechanical problems.

Fixing Kia Error Code p0024 Step By Step

Address the Kia P0024 code by inspecting the camshaft position actuator solenoid for potential issues.

To fix the Kia OBDII code P0024, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the camshaft position actuator solenoid.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no issues are found with the wiring and connectors, consider replacing the camshaft position actuator solenoid.
Clear the fault code from the vehicle’s computer using an OBDII scanner.
Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.

Cost Of Fixing Kia p0024 Fault Code

The repair for Kia fault code P0024 typically involves addressing issues with the camshaft position.

The cost to diagnose and fix a Kia OBD code P0024 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

The final cost depends on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Kia p0024 OBD Code

Kia fault code P0024 indicates a camshaft position timing overadvanced or system performance issue.

OBD code P0024 for Kia vehicles indicates an issue with the B camshaft position timing overadvanced or system performance (Bank 2).

This code is triggered by the Engine Control Module (ECM) when it detects that the camshaft timing is too advanced or that the system is not performing as expected in Bank 2. The ECM monitors camshaft position using signals from the camshaft position sensor to ensure proper timing for optimal engine performance.

Mechanic’s Tech Notes

Detailed information on Kia fault code P0024, including possible causes and diagnostic steps for resolution.

OBDII code P0024 in a Kia typically indicates an issue with the camshaft position actuator control circuit.

To diagnose this, use a voltmeter to check the voltage at the camshaft position actuator solenoid connector.

Ensure there is battery voltage present.

Next, use a scan tool to command the camshaft position actuator on and off while monitoring the camshaft position sensor data.

If the data does not change accordingly, the actuator may be faulty.

Additionally, inspect the wiring harness and connectors for any damage or corrosion.

Clear the code after repairs and recheck to confirm the issue is resolved.

FAQ

1. What are the common causes of OBD code P0024 in a Kia vehicle?

Common causes of OBD code P0024 in a Kia: dirty engine oil, low oil level, faulty camshaft actuator, engine mechanical issues. Inspect wiring harness and connectors for damage.

2. How can I diagnose and fix OBD code P0024 in my Kia?

Diagnose P0024 in Kia: Symptoms Engine Light ON, Lack of power, rough idle. Causes Dirty/low oil, faulty camshaft actuator, engine issues. Fix Inspect wiring, connectors for damage.

3. Is it safe to continue driving my Kia with OBD code P0024 present?

It is not safe to continue driving with OBD code P0024. Possible causes include dirty engine oil, low oil level, faulty camshaft actuator, or engine mechanical issues.

Wrap Up

If your Kia is displaying OBD code P0024, you may experience rough idling, decreased fuel efficiency, or engine misfires.

This code typically indicates an issue with the camshaft position sensor B circuit range/performance in bank 2. Possible causes include a faulty camshaft position sensor, wiring issues, or a problem with the engine control module.

To address Kia OBD code P0024, start by inspecting the camshaft position sensor B and its wiring harness for any signs of damage or corrosion.

Test the sensor’s functionality and connections, and if necessary, replace the sensor or

[SOLVED] Kia P0024 Code: Fast Fix For ‘b’ Camshaft Overadvanced