[SOLVED] Jeep P0305 Code: Fast Fix For Cylinder Misfire

The OBD code P0305 for a Jeep indicates a misfire in cylinder 5. This affects the engine’s ignition system.

Symptoms include engine light on, lack of power, hard starting, and engine hesitation.

Common causes are a faulty spark plug, clogged fuel injector, or ignition coil issues.

It’s a moderate issue that needs attention.

To fix, inspect and potentially replace the spark plug, fuel injector, or ignition coil for cylinder 5.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Jeep p0305 OBD Code

The engine runs rough and misfires on cylinder 5 in a Jeep with fault code P0305.

With OBD code P0305 on a Jeep, symptoms may include: Engine Light ON.
Lack/loss of power.
Hard start.
Engine hesitation.

Causes of the Jeep p0305 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Misfire in cylinder 5 due to ignition system, fuel system, or mechanical issues.

P0305 in a Jeep can be caused by: Faulty spark plug 5.
Clogged or faulty fuel injector 5.
Faulty ignition coil 5.
Fuel injector 5 harness is open or shorted.
Fuel injector 5 circuit poor electrical connection.
Ignition coil 5 harness is open or shorted.
Ignition coil 5 circuit poor electrical connection.
Insufficient cylinder 5 compression.
Incorrect fuel pressure.
Intake air leak.

Fixing Jeep Error Code p0305 Step By Step

Address the misfire on cylinder 5 in a Jeep by checking ignition components and fuel delivery.

To fix a Jeep OBDII code P0305, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Next, focus on cylinder 5, where the misfire is detected.
Check the spark plug for wear or damage and replace if necessary.
Inspect the ignition coil for proper operation and replace if faulty.
Consider swapping the fuel injector with another cylinder to see if the misfire follows.
Finally, reset the fault codes and test drive the vehicle to ensure the issue is resolved.

Cost Of Fixing Jeep p0305 Fault Code

Diagnosing and repairing Jeep fault code P0305 typically involves addressing cylinder 5 misfire issues.

The cost to diagnose and fix a Jeep OBD code P0305 typically ranges from $75 to $150, based on a 1. 0hour repair time.

Factors like shop rates and complexity can affect the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Jeep p0305 OBD Code

Jeep fault code P0305 indicates a misfire in cylinder 5.

OBD code P0305 for a Jeep indicates a misfire was detected in cylinder 5. This code is triggered by the Engine Control Module (ECM) when it detects a misfire during the monitoring of crankshaft speed fluctuations.

The ECM monitors the engine’s crankshaft speed to detect any irregularities in the firing of the cylinders.

In this case, cylinder 5 is the one showing the misfire.

Misfires can be caused by issues such as faulty spark plugs, ignition coils, fuel injectors, or engine mechanical problems.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Jeep fault code P0305 related to cylinder 5 misfire.

For Jeep OBDII code P0305 (Cylinder 5 Misfire Detected), start by checking the ignition system components like spark plugs, ignition coils, and spark plug wires for any issues.

Use a voltmeter to test the coil pack’s primary and secondary circuits for proper voltage and resistance.

Inspect the fuel injector for clogging or wiring issues.

Perform a compression test on cylinder 5 to check for any internal engine problems.

A scan tool can help monitor live data to pinpoint the misfire cause.

Consider swapping components between cylinders to see if the misfire moves.

Address any identified issues to resolve the P0305 code.

FAQ

1. What are the common causes of OBD code P0305 in a Jeep vehicle?

Common causes of OBD code P0305 in a Jeep: Faulty spark plug 5, clogged/faulty fuel injector 5, faulty ignition coil 5, poor electrical connections, insufficient cylinder 5 compression.

2. How can I diagnose and fix a misfire related to OBD code P0305 in my Jeep?

Diagnose P0305 misfire in Jeep: Check spark plug 5, fuel injector 5, ignition coil 5. Inspect wiring for damage, poor connections. Fix as needed.

3. Is it safe to continue driving my Jeep with OBD code P0305,

It is not safe to continue driving with OBD code P0305 on a Jeep. Address the possible causes mentioned to prevent further damage.

Wrap Up

If your Jeep is experiencing a misfire with OBD code P0305, it may be caused by a faulty ignition coil, spark plug, fuel injector, or low compression in cylinder 5. Wiring issues or a vacuum leak could also trigger this code.

To address Jeep OBD code P0305, check the ignition coil, spark plug, and fuel injector for cylinder 5. Inspect the wiring harness and connectors for any damage or corrosion.

Perform a compression test on cylinder 5 to ensure engine health.