[SOLVED] Jeep C1035 Code: Fast Fix For Right Rear Wheel Speed Error

The OBD code C1035 for a Jeep indicates an issue with the Right Rear Wheel Speed Sensor circuit in the AntiLock Brake System (ABS).

Symptoms include the ABS warning light and engine light being illuminated.

Possible causes are tire air pressure mismatch, a faulty sensor, or wiring issues.

This is a serious issue affecting braking performance.

To fix, inspect and repair the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Jeep c1035 OBD Code

The Jeep C1035 fault code typically triggers when there is an issue with the right rear wheel speed sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible loss of ABS functionality.
Brake pedal may feel different during braking.
Unusual noises from the ABS system.

Causes of the Jeep c1035 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Jeep fault code C1035 include issues with the left rear wheel speed sensor.

C1035 can be caused by tire air pressure mismatch.
A faulty Right Rear Wheel Speed Sensor.
An open or shorted Right Rear Wheel Speed Sensor harness.
A poor electrical connection in the Right Rear Wheel Speed Sensor circuit.
A faulty AntiLock Brake System (ABS) Module.

Fixing Jeep Error Code c1035 Step By Step

Resolve fault code Jeep C1035 by inspecting and repairing the left rear wheel speed sensor circuit.

To fix Jeep OBDII code C1035, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Test the wheel speed sensors for proper operation and connection.
Inspect the ABS control module for any faults or damage.
Reset the ABS module using a scan tool to clear any stored fault codes.
If the issue persists, consider replacing the faulty wheel speed sensor or ABS control module as needed.

Cost Of Fixing Jeep c1035 Fault Code

Diagnosing and repairing Jeep fault code C1035 typically involves inspecting and possibly replacing the left rear wheel speed sensor.

The cost to diagnose and fix Jeep OBD code C1035 depends on the estimated 1. 0hour repair time.

Labor rates range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.

Details of the Jeep c1035 OBD Code

Jeep C1035 code indicates an issue with the left rear wheel speed sensor circuit.

Jeep OBD code C1035 means that the right rear wheel speed sensor signal is erratic.

This code is triggered by the AntiLock Brake System (ABS) module when it detects inconsistent or abnormal signals coming from the right rear wheel speed sensor.

The ABS module monitors wheel speed to ensure proper operation of the ABS system and traction control.

When the signal from the right rear wheel speed sensor deviates from expected values, the C1035 trouble code is set.

Mechanic’s Tech Notes

Detailed information on resolving Jeep fault code C1035 for the left rear wheel speed sensor circuit.

To diagnose and fix OBDII code C1035 on a Jeep, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If communication issues are detected, reprogramming or reflashing the TCM may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection will help identify and address the root cause of the C1035 fault code.

FAQ

1. What does OBD code C1035 indicate in a Jeep vehicle?

OBD code C1035 in a Jeep indicates an issue with the Right Rear Wheel Speed Sensor circuit. Check for tire pressure mismatch and inspect sensor wiring.

2. How can I diagnose the cause of OBD code C1035 in my Jeep?

To diagnose OBD code C1035 in your Jeep, check for tire pressure mismatch, faulty right rear wheel speed sensor, harness issues, or ABS module problems. Inspect wiring and connectors.

3. What are the common fixes for OBD code C1035 in a Jeep?

For OBD code C1035 in a Jeep, common fixes include checking tire pressure, inspecting right rear wheel speed sensor, harness, connectors, and ABS module for issues.

Wrap Up

If your Jeep is displaying OBD code c1035 and you’re experiencing issues with the ABS system, it could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor connections at the sensor or module.

To address Jeep OBD code c1035, start by inspecting the wheel speed sensor and its wiring for any visible damage.

Check the connectors for corrosion or looseness, and ensure proper connection at the ABS module.

Replace the sensor if necessary and clear the code to see if the issue is resolved.