[SOLVED] Jeep B2299 Code: Quick Fix For Rear Camera Module

The OBD code B2299 for Jeep indicates a fault with the Rear Camera Module.

Symptoms include the Engine Light being ON.

This code is usually caused by a faulty Rear Camera Module, open/shorted harness, or poor electrical connection.

It’s not a critical issue.

To fix it, inspect the wiring harness, connectors, and component for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Jeep b2299 OBD Code

The Jeep is experiencing issues related to the B2299 fault code.

Symptoms: Service Engine Soon Warning Light ON.
Intermittent loss of communication with occupant restraint controller module.
Vehicle may not start.
Horn may sound intermittently.

Causes of the Jeep b2299 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Jeep fault code B2299 include faulty occupant classification system components.

Jeep OBD code B2299 can be caused by a Faulty Rear Camera Module.
An open or shorted Rear Camera Module harness.
A poor electrical connection in the Rear Camera Module circuit.

Fixing Jeep Error Code b2299 Step By Step

To resolve fault code Jeep B2299, inspect and repair the Occupant Classification System (OCS) module.

To fix the Jeep OBDII code B2299, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the occupant classification system.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, consider resetting the occupant classification module.
Perform a software update if available.
If the problem persists, consider replacing the occupant classification module as a last resort.

Cost Of Fixing Jeep b2299 Fault Code

The repair for Jeep fault code B2299 may involve replacing the occupant classification module.

The cost to diagnose and fix Jeep OBD code B2299 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost will vary based on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Jeep b2299 OBD Code

The Jeep B2299 code indicates a restraint system fault related to the passengerside airbag.

OBD code B2299 for Jeep vehicles indicates a fault with the occupant classification system.

This system is responsible for determining whether a passenger is present in the front passenger seat and if they are of a size that requires the airbag to deploy in the event of a crash.

The code is triggered by the occupant classification module (OCM) based on input from the weight sensors in the passenger seat.

Mechanic’s Tech Notes

For Jeep fault code B2299, refer to detailed diagnostic information for troubleshooting guidance.

To diagnose and fix OBDII code B2299 in a Jeep, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If communication issues are detected, reprogramming or reflashing the TCM may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection will help identify and address the root cause of the B2299 fault code.

FAQ

1. What does OBD code B2299 indicate in a Jeep vehicle?

OBD code B2299 in a Jeep indicates an issue with the Rear Camera Module. Check for wiring harness faults and poor connections for repair.

2. What are the common symptoms associated with code B2299 in a Jeep?

Common symptoms of code B2299 in a Jeep include the Engine Light ON. This code is often caused by issues with the Rear Camera Module or its wiring.

3. How can I diagnose and repair OBD code B2299 in my Jeep vehicle?

Diagnose OBD code B2299 in Jeep: Symptoms Engine Light ON. Causes Faulty Rear Camera Module, harness issues. Fix Inspect wiring, connectors for damage, corrosion.

Wrap Up

If your Jeep is displaying OBD code b2299 and you’re experiencing issues with the Occupant Classification System (OCS), it could be caused by a faulty OCS module, damaged wiring harness, or a malfunctioning OCS sensor.

These issues may lead to inaccurate passenger seat occupancy detection and affect airbag deployment in case of a crash.

To address Jeep OBD code b2299, start by inspecting the wiring connections to the OCS module and sensor.

Check for any signs of damage, corrosion, or loose connections.

If the wiring appears intact, consider testing the OCS module