[SOLVED] Isuzu P0303 Code: Fast Fix For Cylinder 3 Misfire

The OBD code P0303 for Isuzu indicates a misfire in cylinder 3. This affects the ignition system.

Symptoms include engine light on, lack of power, hard starting, and engine hesitation.

Common causes are a faulty spark plug, clogged fuel injector, or ignition coil issues.

It’s a moderate issue that needs attention.

To fix, inspect and repair the spark plug, fuel injector, or ignition coil, and check related wiring for any damage.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

The engine runs rough or misfires on cylinder 3 in an Isuzu with fault code P0303.

  • With Isuzu OBD code P0303, the engine light will be ON.
  • Lack/loss of power may be experienced.
  • Hard starting could occur.
  • Engine hesitation might be noticeable.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Fault code P0303 on an Isuzu indicates a misfire in cylinder 3, often due to ignition system issues.

  • P0303 for Isuzu can be caused by: Faulty Spark Plug #3.
  • Clogged or faulty Fuel Injector #3.
  • Faulty Ignition Coil #3.
  • Fuel Injector #3 harness is open or shorted.
  • Fuel Injector #3 circuit poor electrical connection.
  • Ignition Coil #3 harness is open or shorted.
  • Ignition Coil #3 circuit poor electrical connection.
  • Insufficient cylinder 3 compression.
  • Incorrect fuel pressure.
  • Intake air leak.

Address the misfire on cylinder 3 in an Isuzu by checking ignition components and fuel delivery.

  • To fix Isuzu OBDII code P0303, first, review the possible causes related to cylinder 3 misfire.
  • Visually inspect the ignition system components such as spark plugs, ignition coils, and spark plug wires for any signs of wear or damage.
  • Check the fuel injector for proper operation and ensure it is delivering fuel to cylinder 3 correctly.
  • Test the compression in cylinder 3 to verify engine mechanical condition.
  • Replace any faulty ignition components or fuel injector if necessary.
  • Clear the fault code using a scan tool and monitor the vehicle for any recurring misfires.

Diagnosing and repairing Isuzu P0303 involves troubleshooting and fixing cylinder 3 misfire issues.

The cost to diagnose and fix the Isuzu OBD code P0303 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. Actual cost may vary based on shop rates, complexity of the issue, and parts needed.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Isuzu P0303 indicates a misfire in cylinder 3.

OBD code P0303 for Isuzu vehicles indicates a misfire was detected in cylinder 3. This code is triggered by the Engine Control Module (ECM) when it detects a deviation in crankshaft speed that indicates a misfire in cylinder 3 during the engine’s operation.

The ECM monitors the engine’s crankshaft speed using data from the crankshaft position sensor to identify misfires in specific cylinders, in this case, cylinder 3.

Detailed information on diagnosing and repairing Isuzu fault code P0303 related to cylinder 3 misfire.

To diagnose and fix OBDII code P0303 on an Isuzu, start by checking the ignition system components like spark plugs, ignition coils, and spark plug wires for any faults.

Use a voltmeter to test the ignition coil for proper voltage supply.

Inspect the fuel injector for clogging or malfunction.

Perform a compression test to check the engine’s mechanical condition.

Additionally, check for vacuum leaks that could affect cylinder #3. Use a scan tool to monitor live data and confirm misfires on cylinder #3. Visually inspect wiring harnesses and connectors for any damage or corrosion.

Clear the code after repairs and test drive to ensure the issue is resolved.

1. What are the common causes of OBD code P0303 in an Isuzu vehicle?

Common causes of OBD code P0303 in an Isuzu vehicle include faulty Spark Plug #3, clogged Fuel Injector #3, faulty Ignition Coil #3, and poor electrical connections.

2. How can I diagnose and fix a misfire related to OBD code P0303 on my Isuzu?

Diagnose P0303 on Isuzu for misfire: Check spark plug, fuel injector, ignition coil #3. Inspect wiring for damage, connectors for issues. Fix as needed.

3. Is it safe to continue driving my Isuzu with OBD code P

It is not safe to continue driving with OBD code P03. Possible causes include faulty spark plug, clogged fuel injector, or ignition coil issues.

Isuzu p0303 error fault code explained

If your Isuzu is experiencing a misfire with OBD code P0303, you may notice rough idling, lack of power, or engine vibrations.

This code typically indicates a misfire in cylinder 3, caused by issues like a faulty spark plug, ignition coil, fuel injector, or low compression.

To address Isuzu OBD code P0303, start by checking the spark plug, ignition coil, and fuel injector for cylinder 3. Inspect the wiring harness and connectors for any damage or corrosion.

Perform a compression test to ensure engine health and proper cylinder compression.

Scroll to Top