[SOLVED] Isuzu P0092 Code: Fix High Voltage Fuel Pressure Regulator

The OBD code P0092 for Isuzu indicates a fault with the fuel pressure sensor circuit.

This affects the fuel system.

Symptoms include the Engine Light being ON.

Common causes are a faulty fuel pressure sensor or issues with its wiring.

While not a severe issue, it can affect engine performance.

To fix, inspect the sensor, wiring, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Isuzu p0092 OBD Code

The Isuzu P0092 fault code indicates an issue with the fuel pressure regulator control circuit.

Symptoms: Engine Light ON.
Reduced engine performance.
Possible hard starting.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Isuzu p0092 OBD Code

P0092 in Isuzu vehicles typically indicates a fuel pressure regulator control circuit low issue.

P0092 can be caused by a faulty fuel pressure sensor.
A fuel pressure sensor harness that is open or shorted.
A fuel pressure sensor electrical circuit with poor connection.
A faulty Engine Control Module (ECM).

Fixing Isuzu Error Code p0092 Step By Step

Address the fuel pressure regulator control circuit low voltage issue on an Isuzu with code P0092.

To fix P0092 OBDII in an Isuzu, start by reviewing the possible causes mentioned above.
Visually examine the corresponding wiring harness and connectors for any damage.
Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check the fuel pressure sensor for proper operation and replace it if necessary.
Clear the fault codes and perform a test drive to verify the repair.
If the issue persists, consider checking the fuel system for any leaks or restrictions that could be causing incorrect fuel pressure readings.

Cost Of Fixing Isuzu p0092 Fault Code

Diagnosing and repairing Isuzu P0092 involves checking the fuel pressure sensor circuit for issues.

The cost to diagnose and fix the Isuzu OBD code P0092 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, depending on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Isuzu p0092 OBD Code

Isuzu P0092 indicates a fuel pressure regulator control circuit low.

OBD code P0092 for Isuzu vehicles indicates an issue with the fuel pressure regulator control circuit.

This code is triggered when the Engine Control Module (ECM) detects that the voltage signal from the fuel pressure regulator control circuit is higher or lower than the expected range.

The fuel pressure regulator control circuit is responsible for regulating the fuel pressure in the fuel system.

If the ECM detects a fault in this circuit, it can lead to drivability issues and poor engine performance.

When diagnosing a P0092 code, technicians typically check the wiring and connectors associated with the fuel pressure regulator control circuit for any damage or corrosion.

They also test the fuel pressure regulator itself to ensure it is functioning correctly.

It’s important to address a P0092 code promptly to prevent potential damage to the engine and ensure optimal vehicle performance.

Mechanic’s Tech Notes

Detailed information on diagnosing and repairing Isuzu fault code P0092 related to fuel pressure regulator control circuit low.

To diagnose and fix OBDII code P0092 on an Isuzu, start by checking the fuel pressure regulator control circuit.

Use a voltmeter to test the voltage at the fuel pressure regulator control solenoid.

Ensure the voltage matches specifications.

Next, inspect the wiring harness and connectors for any damage or corrosion.

Check the connector pins for any signs of being broken, bent, or pushed out.

If everything looks good, consider testing the fuel pressure regulator itself for proper operation.

If no issues are found, a scan tool can be used to monitor fuel pressure data and system operation for further diagnosis.

FAQ

1. What are the common causes of OBD code P0092 in an Isuzu vehicle?

Common causes of OBD code P0092 in an Isuzu vehicle include a faulty fuel pressure sensor, open/shorted sensor harness, poor electrical connections, or a faulty ECM.

2. How can I diagnose and fix OBD code P0092 in my Isuzu vehicle?

Diagnose and fix OBD code P0092 in your Isuzu: Symptoms Engine Light ON; Causes Faulty fuel pressure sensor, harness issues; Fix Inspect wiring, connectors for damage.

3. Is it safe to continue driving with OBD code P0092 present in my Isuzu

Yes, it is generally safe to drive with OBD code P0092 in your Isuzu. Check fuel pressure sensor and related wiring for issues.

Wrap Up

If your Isuzu is displaying OBD code P0092, you may experience issues like hard starting, rough idling, or stalling.

This code typically indicates a problem with the fuel pressure regulator control circuit, possibly due to a faulty fuel pressure regulator, damaged wiring, or poor electrical connections.

To address Isuzu OBD code P0092, start by checking the wiring harness and connectors for any signs of damage or corrosion.

Test the fuel pressure regulator for proper operation and replace it if necessary.

Ensure all electrical connections related to the fuel pressure regulator are secure and free of debris.