The OBD code B2657 for Infiniti indicates a fault with the Outside Odor Detecting Sensor system.
Symptoms include the Engine Light being ON.
Possible causes are a faulty sensor, open/shorted sensor harness, poor electrical connection, or a faulty A/C Automatic Amplifier.
This issue is not critical.
To fix, inspect the sensor, harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Infiniti b2657 OBD Code
The Infiniti B2657 fault code may be accompanied by issues related to the steering angle sensor.
- Symptoms: Service Engine Soon Warning Light ON.
- Intermittent starting issues.
- Loss of power while driving.
- Engine stalling at idle.
- Difficulty shifting gears.
- Highpitched whining noise from the transmission.
Causes of the Infiniti b2657 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Infiniti fault code B2657 include faulty keyless entry receiver or wiring issues.
- B2657 can be caused by a Faulty Outside Odor Detecting Sensor.
- An open or shorted Outside Odor Detecting Sensor harness.
- A poor electrical connection in the Outside Odor Detecting Sensor circuit.
- A Faulty Air Condition (A/C) Automatic Amplifier.
Fixing Infiniti Error Code b2657 Step By Step
Address the faulty steering lock unit to resolve Infiniti B2657.
- To fix Infiniti OBDII code B2657, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the brake pedal position sensor circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a thorough inspection of the brake pedal position sensor itself.
- Test the sensor’s operation and signal output using a multimeter or scan tool.
- Replace the brake pedal position sensor if it fails the testing.
- Clear the fault code using a diagnostic scan tool and test drive the vehicle to ensure the code does not return.
Cost Of Fixing Infiniti b2657 Fault Code
The repair for Infiniti fault code B2657 may involve replacing the keyless entry receiver.
The cost to diagnose and fix the Infiniti OBD code B2657 will depend on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the cost could be between $75 and $150, excluding parts.
The final cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Infiniti b2657 OBD Code
The Infiniti B2657 code indicates a malfunction in the park switch circuit.
Infiniti OBD code B2657 means the Park Switch Input Circuit Failure.
This code is triggered by the Body Control Module (BCM) when it detects a malfunction in the park switch input circuit.
The park switch input circuit is part of the transmission range sensor or park/neutral position switch, which informs the BCM of the gear selector position.
When this circuit fails, it can cause issues with starting the vehicle or shifting gears properly.
Mechanic’s Tech Notes
This code indicates a malfunction in the keyless entry receiver circuit in Infiniti vehicles.
To diagnose and fix OBDII code B2657 in an Infiniti, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of corrosion, bending, or breakage.
This thorough inspection can help identify and resolve the issue causing the B2657 fault code.
FAQ
OBD code B2657 in an Infiniti indicates an issue with the Outside Odor Detecting Sensor. Check sensor, wiring, and connections for faults to resolve.
Diagnose OBD code B2657 in Infiniti for Engine Light ON. Check Outside Odor Detecting Sensor, harness, A/C Automatic Amplifier. Inspect wiring, connectors for damage, corrosion.
Common symptoms of OBD code B2657 in an Infiniti include Engine Light ON. Possible causes are a faulty Outside Odor Detecting Sensor or related wiring issues.
Wrap Up
If your Infiniti is displaying OBD code b2657, you may experience issues with the vehicle’s keyless entry system, such as the remote not working properly or the vehicle not recognizing the key fob.
This code is commonly caused by a malfunctioning keyless entry receiver, faulty wiring connections, or a weak key fob battery.
To address Infiniti OBD code b2657, start by checking the wiring harness and connectors related to the keyless entry system.
Ensure all connections are secure and free of corrosion or damage.
Test the key fob battery voltage and replace if
