The OBD code P0335 for Hyundai indicates a problem with the crankshaft position sensor circuit.
Symptoms include the engine light being on, engine power loss, and potential stalling while driving.
Causes can be a faulty sensor, wiring issues, damaged signal plate, or starter motor problems.
This issue should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting and repairing the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Hyundai p0335 OBD Code
The vehicle may experience starting issues or stalling due to Hyundai fault code P0335.
- With OBD code P0335 on a Hyundai, symptoms may include: Engine Light ON.
- Engine Lack / Loss of Power.
- Engine may stall while driving.
Causes of the Hyundai p0335 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Hyundai fault code P0335 include faulty crankshaft position sensor or wiring issues.
- P0335 can be caused by a faulty crankshaft position sensor.
- A crankshaft position sensor harness that is open or shorted.
- A crankshaft position sensor circuit with poor electrical connection.
- A damaged signal plate.
- A faulty starter motor.
- A faulty starting system circuit.
- A dead or weak battery.
Fixing Hyundai Error Code p0335 Step By Step
Replace the crankshaft position sensor on the Hyundai to address fault code P0335.
- To fix the Hyundai OBDII code p0335, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, locate the crankshaft position sensor on the engine.
- Inspect the sensor and its wiring for any visible damage or corrosion.
- Test the crankshaft position sensor using a multimeter to check for proper resistance values.
- Replace the crankshaft position sensor if it fails the resistance test.
- Clear the fault codes using an OBDII scanner and test drive the vehicle to verify that the p0335 code does not return.
Cost Of Fixing Hyundai p0335 Fault Code
Diagnosing and repairing Hyundai fault code P0335 typically involves testing and replacing the crankshaft position sensor.
The cost to diagnose and fix a Hyundai OBD code P0335 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
Details of the Hyundai p0335 OBD Code
Fault code P0335 in a Hyundai indicates a crankshaft position sensor circuit malfunction.
OBD code P0335 for Hyundai vehicles indicates a crankshaft position sensor A circuit malfunction.
This code is triggered by the Engine Control Module (ECM) when it detects an issue with the signal from the crankshaft position sensor.
The crankshaft position sensor is responsible for monitoring the position and speed of the crankshaft, providing crucial data for ignition timing and fuel injection.
When the ECM receives erratic or no signal from the sensor, it triggers the P0335 fault code.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Hyundai fault code p0335 related to the crankshaft position sensor.
For OBDII code P0335 in a Hyundai, start by checking the crankshaft position sensor (CKP) circuit.
Use a voltmeter to test the sensor’s resistance and voltage output.
Inspect the sensor for any physical damage or contamination.
Check the wiring harness and connectors for any issues like corrosion or poor connections.
Ensure the CKP sensor is properly aligned and has the correct air gap.
If everything checks out, consider testing the CKP sensor signal with a scan tool while cranking the engine.
If the signal is erratic or absent, replacing the CKP sensor may be necessary.
FAQ
The common cause of OBD code P0335 in a Hyundai is a faulty crankshaft position sensor or related wiring issues. Inspect sensor, harness, and connections for faults.
Diagnose P0335 in Hyundai for Engine Light, power loss, stalling. Check crankshaft sensor, wiring, connectors for faults. Inspect signal plate, starter, battery.
It is not safe to continue driving with OBD code P0335 in your Hyundai. The faulty crankshaft position sensor can cause engine stalling and power loss.
Wrap Up
If your Hyundai is showing OBD code p0335 and experiencing stalling, rough idling, or difficulty starting, it may be due to a faulty crankshaft position sensor or issues with the sensor circuit wiring.
The p0335 code indicates a problem with the crankshaft position sensor A circuit.
To address Hyundai OBD code p0335, first, inspect the wiring harness for any damage or corrosion.
Check the connectors for a secure fit and proper contact.
If no visible issues are found, consider replacing the crankshaft position sensor to resolve the problem.
