The OBD code P0326 for Hyundai indicates a fault with the Knock Sensor Circuit Range/Performance.
This affects the engine’s ability to detect knocking or pinging, leading to symptoms like the Engine Light being ON, engine power loss.
Common causes include a faulty knock sensor, poor electrical connections, or issues with the Engine Control Module.
It’s essential to inspect wiring and connectors for damage and address any issues found.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Hyundai p0326 OBD Code
The vehicle may experience engine misfires or rough idling with Hyundai fault code P0326.
- Symptoms: Engine Light ON.
- Engine Lack / Loss of Power.
Causes of the Hyundai p0326 OBD Code
P0326 in a Hyundai indicates a fault with the knock sensor circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- Causes: Faulty Knock Sensor.
- Knock Sensor circuit poor electrical connection.
- Knock Sensor harness is open or shorted.
- Faulty Engine Control Module (ECM).
Fixing Hyundai Error Code p0326 Step By Step
Replace the knock sensor in a Hyundai with fault code P0326.
- To fix Hyundai OBDII code P0326, first, review the possible causes related to the knock sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the knock sensor for proper operation and resistance.
- Replace the knock sensor if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Hyundai p0326 Fault Code
The repair for Hyundai fault code P0326 typically involves replacing the knock sensor.
The cost to diagnose and fix Hyundai OBD code P0326 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, excluding parts.
Factors like shop rates and diagnostic complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Hyundai p0326 OBD Code
Fault code P0326 in Hyundai indicates a knock sensor circuit range/performance issue.
OBD code P0326 for Hyundai vehicles indicates that the Knock Sensor 1 Circuit Range/Performance problem has been detected.
This code is triggered by the Engine Control Module (ECM) when it detects that the signal from the knock sensor 1 is outside the expected range or performance parameters.
The knock sensor is responsible for detecting engine knocking or pinging, which can cause damage if not addressed.
When the ECM receives abnormal signals from the knock sensor, it triggers the P0326 fault code to alert the driver or technician of a potential issue with engine performance.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing fault code P0326 in Hyundai vehicles.
To diagnose Hyundai OBDII code P0326, start by checking the knock sensor circuit for any faults.
Use a voltmeter to test the sensor’s resistance and ensure it falls within specifications.
Inspect the wiring harness and connectors for any damage or corrosion.
Verify the knock sensor signal using a scan tool to see if it matches engine conditions.
If the signal is erratic, consider replacing the knock sensor.
Additionally, check for any engine mechanical issues that could cause false knock sensor readings.
Remember to clear the code after repairs and test drive to confirm the issue is resolved.
FAQ
Common symptoms of OBD code P0326 in a Hyundai: Engine Light ON, engine lack of power. Causes: Faulty knock sensor, poor electrical connection. Fix: Inspect wiring and connectors for damage.
OBD code P0326 in a Hyundai is typically caused by a faulty knock sensor or related wiring issues. Diagnose by visually inspecting wiring and connectors for damage.
To address OBD code P032, diagnose and repair the faulty knock sensor, check wiring connections, inspect harness for shorts, and examine ECM for issues.
Wrap Up
If your Hyundai is displaying OBD code p0326 and experiencing rough idling or stalling, it could be caused by a faulty knock sensor circuit.
This code indicates that the knock sensor 1 circuit has a range/performance problem, possibly due to sensor failure, wiring issues, or poor connections.
To address Hyundai OBD code p0326, start by inspecting the knock sensor wiring harness for any damage or corrosion.
Check the sensor connector for a secure fit and proper contact.
If no visible issues are found, consider testing the knock sensor itself for proper operation or replacing it if necessary.
