The OBD code P0011 for Hyundai indicates an issue with the intake camshaft position timing.
It affects the Variable Valve Timing (VVT) system.
Symptoms include the engine light being on, lack of power, and rough idle.
Causes can be low/dirty engine oil, faulty VVT components, or wiring issues.
This code should be addressed promptly to prevent engine damage.
A possible fix involves inspecting and repairing the VVT system components and wiring connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Hyundai p0011 OBD Code
The engine may exhibit rough idling or poor acceleration with Hyundai P0011 fault code.
- With OBD code P0011 on a Hyundai, you may notice the Engine Light ON.
- Lack/Loss of power can be experienced.
- Engine rough idle may occur.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Hyundai p0011 OBD Code
The P0011 code on a Hyundai typically indicates an issue with the camshaft position timing.
- P0011 can be caused by low or dirty engine oil.
- A faulty Valve Timing Control (VTC).
- A Valve Timing Control (VTC) harness with an open or shorted circuit.
- A Valve Timing Control (VTC) circuit with a poor electrical connector.
- Incorrect timing.
- Engine mechanical problems.
- A damaged Engine Control Module (ECM).
Fixing Hyundai Error Code p0011 Step By Step
Address Hyundai P0011 by inspecting and potentially replacing the variable valve timing (VVT) solenoid or camshaft position sensor.
- To fix Hyundai OBDII code P0011, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the engine oil level and quality, ensuring it is clean and at the correct level.
- Inspect the camshaft position sensor and the variable valve timing (VVT) solenoid for proper operation and replace if necessary.
- Perform an oil change using the manufacturer’s recommended oil viscosity and quality.
- Clear the fault code using a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing Hyundai p0011 Fault Code
Diagnosing and repairing Hyundai P0011 involves inspecting and possibly replacing the intake camshaft position actuator.
The cost to diagnose and fix a Hyundai OBD code P0011 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and the complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Hyundai p0011 OBD Code
Hyundai P0011 code indicates a camshaft position timing overadvanced issue in the engine.
OBD code P0011 for Hyundai vehicles indicates an issue with the intake camshaft position timing.
This code is triggered by the Engine Control Module (ECM) when it detects that the camshaft is not aligned properly with the crankshaft.
The signal involved in this system is typically from the camshaft position sensor, which helps the ECM monitor the camshaft’s position in relation to the crankshaft for optimal engine performance.
Mechanic’s Tech Notes
Detailed information on Hyundai fault code P0011, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code P0011 on a Hyundai, start by checking the oil level and condition.
Inspect the camshaft position sensor and its wiring for any damage or loose connections.
Use a voltmeter to test the sensor’s voltage and resistance.
Verify the camshaft timing using a scan tool capable of reading live data.
If the timing is off, the issue may lie with the timing chain or tensioner.
Consider performing an oil change with the manufacturer’s recommended oil viscosity.
If the problem persists, further inspection of the variable valve timing (VVT) system may be necessary, including the VVT solenoid and oil control valve.
FAQ
Common causes of OBD code P0011 in a Hyundai: Low/dirty engine oil, faulty VTC, open/shorted VTC harness, poor electrical connector, incorrect timing, engine/mechanical issues, damaged ECM.
Diagnose P0011 in Hyundai: Check engine oil, inspect VTC system, wiring harness, connectors for damage. Repair as needed. Review timing and ECM.
It is not safe to continue driving with OBD code P0011 in a Hyundai. Check engine oil, VTC system, wiring, and connectors for issues.
Wrap Up
If your Hyundai is displaying OBD code P0011 along with rough idling or poor acceleration, it may indicate issues with the camshaft position sensor, camshaft phaser, oil control valve, or timing chain.
These components can cause incorrect camshaft timing, triggering the P0011 code.
To address Hyundai OBD code P0011, start by checking the camshaft position sensor and its wiring for any damage or loose connections.
Inspect the oil control valve for proper operation and ensure the timing chain is correctly aligned.
Consider replacing faulty components to resolve the timing issue triggering the P0011
