The OBD code P2654 for Honda indicates an issue with the Variable Valve Timing and Lift Electronic Control (VTEC) / Rocker Arm Solenoid Valve circuit.
Symptoms include the Engine Light being ON.
Causes can be related to engine oil level, oil condition, faulty solenoid valve, wiring harness issues, or poor electrical connections.
This is a moderate issue that should be addressed promptly.
A possible fix involves checking the mentioned causes and inspecting wiring harness and connectors for any damage.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Honda p2654 OBD Code
The vehicle may experience issues related to the variable valve timing system.
- Symptoms: Engine Light ON.
- Possible symptoms for Honda OBD code P2654 may include rough idling.
- Loss of power during acceleration.
- Unusual engine noises.
- Difficulty shifting gears.
Causes of the Honda p2654 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2654 in a Honda is typically triggered by issues related to the variable valve timing system.
- P2654 can be caused by low engine oil level.
- Faulty Variable Valve Timing and Lift Electronic Control (VTEC) / Rocker Arm Solenoid Valve.
- VTEC/Rocker Arm Solenoid Valve harness being open or shorted.
- VTEC/Rocker Arm Solenoid Valve circuit having a poor electrical connection.
Fixing Honda Error Code p2654 Step By Step
Address the issue by replacing the VTEC oil pressure switch on the Honda vehicle.
- To fix Honda OBDII code P2654, first, review the possible causes related to the VTEC oil pressure switch circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the VTEC oil pressure switch for proper operation.
- Replace the VTEC oil pressure switch if necessary.
- Clear the fault codes and perform a road test to ensure the issue is resolved.
Cost Of Fixing Honda p2654 Fault Code
Diagnosing and repairing fault code P2654 on a Honda may involve replacing the VTEC oil pressure switch.
The cost to diagnose and fix Honda OBD code P2654 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Honda p2654 OBD Code
The fault code P2654 on a Honda relates to an issue with the rocker arm actuator control circuit.
Code P2654 on a Honda vehicle means that there is a problem with the ‘A’ Rocker Arm Actuator System.
This code is triggered when the Engine Control Module (ECM) detects an open or short circuit in the ‘A’ Rocker Arm Actuator Control Circuit.
The ‘A’ Rocker Arm Actuator is part of the Variable Valve Timing (VVT) system and is responsible for adjusting the intake valve timing.
When this actuator malfunctions, it can affect engine performance and fuel efficiency.
Mechanic’s Tech Notes
Detailed information on Honda fault code P2654, which relates to the Rocker Arm Actuator Control Circuit Low Voltage.
To diagnose and fix OBDII code P2654 in a Honda, start by checking the wiring harness and connectors related to the VTEC oil pressure switch circuit.
Use a multimeter to test for proper voltage and continuity.
Inspect connector pins for any damage, corrosion, or poor connections.
Additionally, scan tools can help verify communication between the transmission control module (TCM) and other modules over the CAN network.
If necessary, consider reprogramming or reflashing the TCM to address the issue.
By performing these tests and inspections, you can pinpoint the root cause of the problem and take appropriate corrective actions.
FAQ
Common symptoms of OBD code P2654 in a Honda: Engine Light ON, rough engine operation, reduced power. Check engine oil level, VTEC solenoid, wiring. Inspect and repair as needed.
The typical cause of OBD code P2654 in a Honda vehicle is a faulty Variable Valve Timing and Lift Electronic Control (VTEC) / Rocker Arm Solenoid Valve.
Diagnose and fix OBD code P2654 in a Honda by checking engine oil, VTEC solenoid valve, and wiring. Inspect for damage or poor connections in the circuit.
Wrap Up
If your Honda is displaying OBD code p2654, you may experience issues with the Variable Valve Timing (VVT) system.
This code typically indicates a problem with the VVT oil control solenoid valve circuit, possibly due to a faulty solenoid, wiring problems, or low engine oil levels affecting VVT operation.
To address Honda OBD code p2654, start by inspecting the VVT oil control solenoid valve and its wiring harness for any visible damage or loose connections.
Test the solenoid for proper operation and check the oil level to ensure it meets manufacturer
