The OBD code P0455 for Honda indicates a large evaporative emissions leak.
It affects the EVAP system, leading to the Check Engine light coming on and a fuel odor.
Common causes include a loose fuel cap, EVAP system leaks, or damaged components.
While not an immediate threat, it can impact emissions and fuel economy.
To fix, check the fuel cap and inspect the EVAP system components for leaks or damage.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Honda p0455 OBD Code
The specific fault code P0455 on a Honda indicates a large evaporative emissions leak.
- Symptoms: Engine Light ON.
- A noticeable fuel odor may result from fuel vapor release.
Causes of the Honda p0455 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Honda P0455 include loose gas cap, EVAP system leaks, or faulty purge valve.
- P0455 in a Honda can be caused by a missing or loose fuel cap.
- An incorrect fuel filler cap used.
- The fuel filler cap remains open or fails to close.
- Foreign matter caught in the fuel filler cap.
- EVAP canister or fuel tank leaks.
- EVAP system hose leaking.
- Fuel tank leaking.
Fixing Honda Error Code p0455 Step By Step
Repairing a Honda P0455 code involves inspecting the EVAP system for leaks and addressing any issues found.
- To fix Honda OBDII code P0455, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Inspect the fuel cap to ensure it is tight and sealing properly.
- Check the EVAP system for leaks, including hoses, valves, and the charcoal canister.
- Smoke test the EVAP system to pinpoint any leaks.
- Replace any faulty components identified during the inspection.
- Clear the fault code and perform a drive cycle to verify the repair.
Cost Of Fixing Honda p0455 Fault Code
Diagnosing and repairing Honda P0455 involves checking the EVAP system for leaks or faulty components.
The cost to diagnose and fix a Honda OBD code P0455 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and the complexity of the issue can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Honda p0455 OBD Code
The Honda P0455 fault code indicates a large evaporative emissions leak in the vehicle’s system.
Code P0455 on a Honda means that a large leak has been detected in the evaporative emission control system.
This code is triggered by the ECM (Engine Control Module) when it detects that the fuel tank pressure is not holding within the specified range during the EVAP system leak test.
The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere.
A large leak in this system can be caused by a loose or damaged gas cap, a leak in the EVAP system hoses, or a malfunctioning EVAP canister purge valve.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Honda code P0455 related to a large EVAP system leak.
To diagnose and fix OBDII code P0455 on a Honda, start by visually inspecting the fuel cap for proper sealing.
Next, check the EVAP system hoses for any cracks or leaks.
Use a scan tool to monitor the EVAP system pressure sensor readings.
Test the EVAP purge solenoid with a voltmeter to ensure it opens and closes properly.
Inspect the EVAP canister for any damage or leaks.
Clear the code after fixing any issues and perform a drive cycle to ensure the problem is resolved.
FAQ
Common causes of OBD code P0455 in a Honda: loose fuel cap, incorrect cap, EVAP system leaks. Check cap, inspect EVAP system for leaks.
A P0455 code in a Honda indicates a large EVAP system leak. Ignoring it can lead to fuel economy issues and emissions problems. Check and repair EVAP system components promptly.
To diagnose and repair a P0455 code, check fuel cap, inspect EVAP system for leaks, and examine wiring/connectors for damage or corrosion.
Wrap Up
If your Honda triggers OBD code P0455 and you notice a strong fuel odor, rough idle, or difficulty starting, it may be caused by a loose gas cap, a leak in the evaporative emission control system, a faulty purge valve, or a damaged fuel tank pressure sensor.
To address Honda OBD code P0455, start by checking the gas cap for proper sealing, inspecting the EVAP system for leaks, testing the purge valve operation, and examining the fuel tank pressure sensor and its wiring for any issues.
