The OBD code P0341 for Honda indicates a problem with the Camshaft Position Sensor Circuit Range/Performance.
This affects the camshaft position sensor in the engine.
Symptoms include the engine light being on, engine power loss, and potential stalling while driving.
Causes can be a faulty sensor, wiring issues, or problems with the starter motor or battery.
It is a serious issue that should be addressed promptly.
A possible fix involves checking the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Honda p0341 OBD Code
The vehicle may experience rough idling or stalling due to Honda fault code P0341.
- With OBD code P0341 on a Honda, symptoms may include: Engine Light ON.
- Engine Lack / Loss of Power.
- Engine may stall while driving.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Honda p0341 OBD Code
Possible reasons for Honda fault code P0341 include camshaft position sensor issues or timing belt problems.
- P0341 can be caused by a faulty Camshaft Position Sensor.
- A Camshaft Position Sensor harness that is open or shorted.
- A Camshaft Position Sensor circuit with poor electrical connection.
- A faulty starter motor.
- A Starting system circuit issue.
- A dead (weak) battery.
Fixing Honda Error Code p0341 Step By Step
Replace the camshaft position sensor on the Honda to address fault code P0341.
- To fix a Honda OBDII code P0341, start by reviewing the possible causes mentioned above.
- Visually examine the camshaft position sensor and its wiring harness for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, replace the camshaft position sensor and repair or replace any damaged wiring.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Start the engine and ensure the code does not return.
- If the code persists, further diagnostics may be needed to identify the root cause of the issue.
Cost Of Fixing Honda p0341 Fault Code
Diagnosing and repairing fault code P0341 on a Honda typically involves inspecting and possibly replacing the camshaft position sensor.
The cost to diagnose and fix a Honda OBD code P0341 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Honda p0341 OBD Code
The fault code P0341 in a Honda indicates a camshaft position sensor circuit range/performance issue.
Code P0341 on a Honda means that there is a problem with the camshaft position sensor circuit range or performance.
This code is triggered by the Engine Control Module (ECM) when it detects that the camshaft position sensor signal is out of range or not performing as expected.
The camshaft position sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft to ensure proper engine timing.
If the sensor or its circuitry malfunctions, it can lead to drivability issues and poor engine performance.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing fault code P0341 in Honda vehicles.
To diagnose and fix OBDII code P0341 on a Honda, start by checking the camshaft position sensor’s wiring harness and connector for any damage or corrosion.
Use a voltmeter to test the sensor’s voltage and ground connections.
If the wiring looks good, consider testing the camshaft position sensor itself using a scan tool to monitor its performance.
If necessary, replace the sensor.
Additionally, ensure the timing belt is correctly aligned and not causing the issue.
If all checks out, consider reprogramming the engine control module (ECM) as a last resort.
FAQ
Common symptoms of OBD code P0341 in a Honda: Engine Light ON, loss of power, stalling while driving. Causes: Faulty camshaft sensor, wiring issues. Fix: Inspect sensor and wiring.
The typical cause of OBD code P0341 in a Honda is a faulty Camshaft Position Sensor, open/shorted harness, poor electrical connection. Inspect and repair as needed.
Diagnose and repair OBD code P0341 in your Honda by checking the camshaft position sensor, wiring harness, connectors, and related components for faults or damage.
Wrap Up
If your Honda is displaying OBD code p0341, you may experience rough idling, poor acceleration, or stalling.
This code typically indicates a fault with the camshaft position sensor circuit, such as a faulty sensor, damaged wiring, or poor connections.
To address Honda OBD code p0341, start by inspecting the camshaft position sensor and its wiring harness for any visible damage.
Test the sensor’s electrical connections for proper voltage and continuity.
If necessary, replace the sensor and repair any wiring issues to resolve the problem effectively.
