The OBD code P0132 for Honda indicates a fault with the Front Heated Oxygen Sensor Bank 1. Symptoms include the Engine Light being ON.
This code is usually caused by a faulty sensor, wiring issues, or a problem with the ECM/PCM.
It is important to address promptly to prevent potential damage to the catalytic converter.
A possible fix involves inspecting and repairing the sensor, wiring harness, and connectors.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Honda p0132 OBD Code
The vehicle may experience poor fuel economy and rough idling with fault code P0132.
- Symptoms: Check Engine Light ON.
- Possible decrease in fuel efficiency.
- Engine may run rough or hesitate during acceleration.
Causes of the Honda p0132 OBD Code
Possible reasons for Honda P0132 include faulty oxygen sensor, wiring issues, or engine running rich.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- P0132 can be caused by a Faulty Front Heated Oxygen Sensor Bank 1.
- A Front Heated Oxygen Sensor Bank 1 harness that is open or shorted.
- A Front Heated Oxygen Sensor Bank 1 circuit with a poor electrical connection.
- A Faulty ECM/PCM.
Fixing Honda Error Code p0132 Step By Step
Replace faulty oxygen sensor in bank 1 sensor 1 for Honda P0132 fault code.
- To fix Honda OBDII code P0132, first, review the possible causes related to the oxygen sensor circuit high voltage.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Reset the vehicle’s engine control module (ECM) to clear the fault code and see if it returns.
- Consider replacing the oxygen sensor itself if the problem persists after addressing wiring and connector issues.
Cost Of Fixing Honda p0132 Fault Code
Diagnosing and repairing Honda P0132 involves testing and potentially replacing the faulty oxygen sensor.
The cost to diagnose and fix the Honda OBD code P0132 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can affect the final cost.
Details of the Honda p0132 OBD Code
Code P0132 in a Honda indicates a fault with the upstream oxygen sensor voltage being too high.
Code P0132 on a Honda indicates that the O2 sensor circuit high voltage (Bank 1 Sensor 1) has detected a voltage reading above the normal operating range.
This code is triggered by the Engine Control Module (ECM) when the O2 sensor voltage remains above a specified voltage for an extended period of time.
The O2 sensor involved in this fault code is located in the exhaust system before the catalytic converter and is responsible for monitoring the oxygen content in the exhaust gases.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Honda fault code P0132 related to the oxygen sensor circuit high voltage.
To diagnose and fix OBDII code P0132 on a Honda, start by using a voltmeter to test the oxygen sensor’s heater circuit.
Check for proper voltage supply and ground connections.
Next, use a scan tool to monitor the sensor’s activity and ensure it responds correctly.
If the sensor is not heating up as expected, it may need replacement.
Additionally, inspect the wiring harness and connectors for any damage, corrosion, or loose connections.
Address any issues found during the visual inspection to resolve the P0132 fault code effectively.
FAQ
OBD code P0132 in a Honda means the Front Heated Oxygen Sensor Bank 1 is reading high voltage. Check sensor, wiring, and connectors for issues.
Common causes of OBD code P0132 in a Honda include a faulty front heated oxygen sensor Bank 1, open/shorted sensor harness, poor electrical connection, or faulty ECM/PCM.
Diagnose and fix OBD code P0132 in your Honda by checking the front heated oxygen sensor Bank 1 and its wiring for faults or poor connections.
Wrap Up
If your Honda triggers OBD code P0132, you may experience poor fuel economy, rough idling, or a noticeable decrease in engine performance.
This code typically indicates a fault in the upstream oxygen sensor circuit, possibly due to a faulty oxygen sensor, damaged wiring, or a poor electrical connection.
To address Honda OBD code P0132, start by inspecting the wiring harness and connectors leading to the upstream oxygen sensor.
Look for any signs of damage, corrosion, or loose connections.
If no issues are found, consider replacing the oxygen sensor itself to resolve the fault.
