The OBD code B1007 for Honda indicates a fault in the Combination Switch Control Unit.
Symptoms include the Engine Light being ON.
This issue can be caused by a faulty Combination Switch Control Unit, open/shorted harness, poor electrical connection, or a faulty Multiplex Control Unit Module.
It is important to visually inspect wiring harnesses, connectors, and components for damage.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Honda b1007 OBD Code
The vehicle displays an airbag system malfunction warning light on the dashboard.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- The vehicle may experience issues with the airbag system.
- The SRS (Supplemental Restraint System) warning light may come on.
- The driver may notice problems with the airbag deployment system.
Causes of the Honda b1007 OBD Code
Possible triggers for Honda B1007 include faulty airbag control module or wiring issues.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- B1007 can be caused by a faulty Combination Switch Control Unit.
- A Combination Switch Control Unit harness that is open or shorted.
- A Combination Switch Control Unit circuit with poor electrical connection.
- A faulty Multiplex Control Unit Module (MICU).
Fixing Honda Error Code b1007 Step By Step
Address the issue by inspecting the passenger’s airbag inflator unit for Honda B1007 fault code.
- To fix Honda OBDII code B1007, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the SRS control unit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged wiring or connectors as necessary.
- Clear the fault code using a scan tool and test the vehicle to ensure the code does not return.
Cost Of Fixing Honda b1007 Fault Code
The repair for Honda B1007 may involve diagnosing and fixing an issue with the passenger occupant position detection system.
The cost to diagnose and fix Honda OBD code B1007 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Honda b1007 OBD Code
Honda B1007 indicates a fault with the passenger’s airbag inflator module.
OBD code B1007 for Honda vehicles indicates an issue with the driver’s airbag inflator.
This code is triggered by the Supplemental Restraint System (SRS) control unit when it detects a fault in the driver’s airbag inflator circuit.
The B1007 code specifically points to a problem with the driver’s airbag inflator squib circuit short to ground.
This fault can prevent the driver’s airbag from deploying properly in the event of a collision.
If this code is present, it is important to address it promptly to ensure the proper functioning of the vehicle’s safety systems.
Mechanic’s Tech Notes
For Honda B1007, refer to detailed information on the specific fault or error code.
OBDII code B1007 in a Honda may indicate an issue with the Transmission Control Module (TCM) power supply.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to communicate with the TCM over the Controller Area Network (CAN) to verify its responsiveness.
If the TCM does not respond, reprogramming or reflash may be necessary.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint the root cause of the B1007 fault code.
FAQ
OBD code B1007 in a Honda indicates an issue with the Combination Switch Control Unit. Check wiring harness, connectors, and Multiplex Control Unit Module for faults.
Diagnose OBD code B1007 in Honda by checking Combination Switch Control Unit, harness, and connections for faults. Inspect wiring, connectors, and components for damage or corrosion.
Common symptoms of OBD code B1007 in a Honda include Engine Light ON. To address, check Combination Switch Control Unit and wiring harness for faults or poor connections.
Wrap Up
If your Honda is displaying OBD code b1007, you may experience issues with the airbag system, such as a faulty airbag control module, damaged wiring harness, or poor connections at the airbag sensor.
These problems can lead to the airbag warning light staying on or failing to deploy in an accident.
To address Honda OBD code b1007, start by inspecting the wiring harness for any visible damage or loose connections.
Test the airbag sensor and connectors for proper functionality.
If necessary, replace the airbag control module or repair any damaged wiring to ensure the airbag system
