The OBD code P208B for Ford indicates a fault with the Reductant Pump Control Circuit.
Symptoms include the Engine Light being ON.
This issue is commonly caused by a faulty Reductant Pump or related wiring harness issues.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
Fixing this involves checking and repairing any damaged components or connector pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p208b OBD Code
The vehicle may experience issues related to the intake manifold runner control circuit.
- Symptoms: Engine Light ON.
- Reduced engine power.
- Possible rough idle.
- Possible hesitation during acceleration.
Causes of the Ford p208b OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford code P208B include issues with the exhaust gas temperature sensor.
- P208B can be caused by a faulty Reductant Pump.
- A Reductant Pump harness that is open or shorted.
- A Reductant Pump circuit with poor electrical connection.
Fixing Ford Error Code p208b Step By Step
Address the issue by inspecting the exhaust gas temperature sensor circuit for Ford code P208B.
- To fix the Ford OBDII code P208B, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any issues.
- Check for damaged components and inspect the connector pins for signs of damage.
- If no visible issues are found, consider resetting the powertrain control module (PCM) to see if the code clears.
- If the code persists, it may be necessary to replace the exhaust gas temperature (EGT) sensor to resolve the problem.
Cost Of Fixing Ford p208b Fault Code
Diagnosing and repairing fault code P208B on a Ford may involve replacing the exhaust gas temperature sensor.
The cost to diagnose and fix Ford OBD code P208B typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Ford p208b OBD Code
Ford code P208B relates to a fault in the exhaust gas temperature sensor circuit.
Ford OBD code P208B means A Camshaft Position Actuator Control Circuit High Bank 1. This code is triggered when the Engine Control Module (ECM) detects a high voltage condition in the control circuit of the camshaft position actuator for bank 1. The camshaft position actuator is responsible for adjusting the timing of the camshaft to optimize engine performance.
In this case, the ECM monitors the voltage signal from the camshaft position actuator to ensure proper operation.
If the voltage exceeds the specified limit, the ECM sets code P208B.
When diagnosing this code, technicians typically check the wiring and connectors associated with the camshaft position actuator, as well as the actuator itself, to identify any faults that may be causing the high voltage condition.
Mechanic’s Tech Notes
Detailed information on Ford code P208B, including possible causes, symptoms, and diagnostic steps for resolution.
OBDII code P208B in a Ford typically indicates an issue with the transmission fluid temperature sensor circuit.
To diagnose this, use a multimeter to check the sensor’s resistance and voltage values.
Ensure the sensor is functioning correctly and that there are no wiring harness or connector issues.
Scan tools can help monitor sensor data and confirm proper communication with the transmission control module (TCM).
If the sensor and wiring are fine, consider reprogramming the TCM as a potential fix.
Visual inspection of the wiring harness and connectors is crucial to identify any physical damage or corrosion that could be causing the fault.
FAQ
Common symptoms for OBD code P208B in a Ford vehicle include the Engine Light ON and potential causes are a faulty Reductant Pump or related wiring issues.
The typical cause of OBD code P208B in Ford vehicles is a faulty Reductant Pump, open/shorted harness, or poor electrical connection. Inspect and repair as needed.
Diagnose and repair OBD code P208B in a Ford: Symptoms Engine Light ON. Causes Faulty Reductant Pump, harness issues. Fix Inspect wiring, connectors for damage or corrosion.
Wrap Up
If your Ford is displaying OBD code P208B, you may experience issues with the exhaust gas temperature sensor circuit in bank 1 sensor 2. This could be caused by a faulty sensor, wiring problems, or poor connections in the circuit.
To address Ford OBD code P208B, check the exhaust gas temperature sensor for proper operation, inspect the wiring harness for any damage or corrosion, and ensure all connectors are securely attached.
Replace the sensor if necessary and repair any wiring issues to resolve the fault.
