The OBD code P2008 for Ford indicates a problem with the Intake Manifold Runner Control (IMRC) system.
Symptoms include the Engine Light being ON.
The issue is commonly caused by a faulty IMRC actuator or related wiring harness issues.
While this fault is not critical, it can affect engine performance.
A possible fix involves inspecting and repairing the IMRC actuator and its electrical connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p2008 OBD Code
The vehicle may experience a lack of power or poor acceleration with Ford code P2008.
- Symptoms: Engine Light ON.
- Reduced engine performance.
- Loss of power during acceleration.
- Rough idle.
- Increased fuel consumption.
Causes of the Ford p2008 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford P2008 include a faulty intake manifold runner control (IMRC) actuator or wiring issues.
- P2008 can be caused by a faulty Intake Manifold Runner Control (IMRC) actuator.
- An open or shorted Intake Manifold Runner Control actuator harness.
- A poor electrical connection in the Intake Manifold Runner Control actuator circuit.
- A faulty Powertrain Control Module (PCM).
Fixing Ford Error Code p2008 Step By Step
Address the intake manifold runner control circuit open bank 1 issue on a Ford vehicle.
- To fix the Ford OBDII code P2008, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the intake manifold runner control (IMRC) system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If the wiring and connectors appear to be in good condition, proceed to test the IMRC actuator for proper operation.
- Replace the IMRC actuator if it is found to be faulty.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to ensure the P2008 trouble code does not return, indicating a successful repair.
Cost Of Fixing Ford p2008 Fault Code
The repair for Ford P2008 may involve replacing the intake manifold runner control (IMRC) solenoid.
The cost to diagnose and fix the Ford OBD code P2008 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
Details of the Ford p2008 OBD Code
The Ford P2008 code relates to a problem with the intake manifold runner control circuit.
Code P2008 for Ford vehicles means that there is a problem with the intake manifold runner control circuit.
This code is triggered by the Engine Control Module (ECM) when it detects that the position of the intake manifold runner control is out of the specified range.
The intake manifold runner control is responsible for adjusting the length of the intake manifold runners to optimize engine performance at different RPMs.
When the ECM detects an issue with this system, it triggers the P2008 fault code.
Mechanic’s Tech Notes
Detailed information on Ford code P2008, including symptoms, causes, and solutions for efficient troubleshooting.
To diagnose and fix OBDII code P2008 in a Ford vehicle, start by checking the throttle actuator control module (TCM) power and ground using a multimeter.
Verify TCM response over the Controller Area Network (CAN) network with a scan tool.
If the wiring harness or connectors appear damaged, inspect them closely for issues like broken, bent, or corroded pins.
Reflashing the TCM may be necessary to resolve the fault.
FAQ
Common symptoms of OBD code P2008 in a Ford vehicle include Engine Light ON and possible issues with the Intake Manifold Runner Control system.
The typical cause of OBD code P2008 in a Ford vehicle is a faulty Intake Manifold Runner Control (IMRC) actuator or related electrical issues.
Diagnose and fix OBD code P2008 in a Ford: Symptoms Engine Light ON; Causes Faulty IMRC actuator, harness issues; Fix Inspect wiring, connectors for damage or corrosion.
Wrap Up
If your Ford is displaying OBD code P2008, you may experience poor engine performance, reduced fuel efficiency, or rough idling.
This code typically indicates a problem with the intake manifold runner control circuit, such as a stuck runner valve, faulty actuator, or damaged wiring.
To address Ford OBD code P2008, start by inspecting the intake manifold runner control system components, including the runner valve, actuator, and associated wiring harness.
Test the actuator for proper operation and check for any loose or damaged connections in the circuit.
Replace any faulty components as needed to resolve the
