The OBD code P1705 for Ford indicates a Transmission Range Sensor Circuit Malfunction.
This affects the transmission system.
Symptoms include the Engine Light being ON.
Causes can be the gear selector not in Park/Neutral, a faulty Transmission Range Sensor, or related wiring issues.
It is a moderate issue.
To fix, inspect the wiring harness, connectors, and sensor for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford p1705 OBD Code
The vehicle may experience issues related to the transmission range sensor circuit malfunction (Ford P1705).
- Symptoms: Engine Light ON.
- Transmission may not shift properly.
- Vehicle may go into limp mode where it stays in one gear.
- Engine may rev higher than usual during acceleration.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Ford p1705 OBD Code
P1705 in Ford vehicles typically indicates a malfunction in the transmission range sensor circuit.
- P1705 can be caused by the gear selector not in Park or Neutral.
- A faulty Transmission Range Sensor.
- An open or shorted Transmission Range Sensor harness.
- A poor electrical connection in the Transmission Range Sensor circuit.
Fixing Ford Error Code p1705 Step By Step
Address the issue by inspecting the transmission range sensor and its wiring for faults or damage.
- To fix Ford OBDII code P1705, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the transmission range sensor circuit.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found during the visual inspection, proceed to test the transmission range sensor for proper operation.
- Replace the transmission range sensor if it fails the test.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify the repair and ensure the code does not return.
Cost Of Fixing Ford p1705 Fault Code
Diagnosing and repairing Ford P1705 involves troubleshooting the transmission range sensor circuit.
The cost to diagnose and fix the Ford OBD code P1705 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost would likely fall between $75 and $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford p1705 OBD Code
Ford P1705 code relates to the transmission range sensor out of selftest range.
Ford OBD code P1705 means that the transmission range sensor circuit has a malfunction.
This code is triggered by the Powertrain Control Module (PCM) when it detects an issue with the transmission range sensor circuit.
The transmission range sensor, also known as the neutral safety switch, is responsible for informing the PCM of the gear position selected by the driver (Park, Reverse, Neutral, Drive, etc.
).
When the PCM receives inconsistent or incorrect signals from the transmission range sensor circuit, it sets code P1705. This can lead to issues with shifting, starting the vehicle, or even safety concerns.
Mechanic’s Tech Notes
For Ford code P1705, check the transmission range sensor for faults or wiring issues.
To diagnose and fix OBDII code P1705 in a Ford vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P1705 fault code.
FAQ
OBD code P1705 in a Ford means the Transmission Range Sensor circuit has a poor electrical connection. Check wiring, connectors, and sensor for issues.
Common symptoms for fault code P1705 in a Ford vehicle include Engine Light ON, gear selector not in Park/Neutral, faulty Transmission Range Sensor. Fix: Inspect wiring and connectors for damage.
Diagnose P1705 in Ford: Check gear selector, transmission range sensor, wiring harness, connectors for issues. Repair as needed based on findings.
Wrap Up
If your Ford is displaying OBD code P1705, you may experience harsh shifting, transmission slippage, or the transmission may not engage properly.
This code typically indicates a malfunction in the transmission range sensor circuit, possibly due to a faulty transmission range sensor, damaged wiring, or poor electrical connections.
To address Ford OBD code P1705, start by inspecting the transmission range sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s resistance and ensure proper voltage supply.
Check the connectors for tightness and cleanliness, and repair or replace any faulty components as needed
