The OBD code P087A for Ford indicates a fault with the Clutch Position Sensor Circuit.
Symptoms include the Engine Light being ON.
This code is usually caused by a faulty Clutch Position Sensor or issues with the sensor’s wiring.
It is important to address this issue promptly to prevent potential transmission problems.
A possible fix involves inspecting the wiring harness and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p087a OBD Code
The vehicle may exhibit shifting issues or abnormal transmission operation with fault code P087A.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible harsh shifting from the transmission.
- Vehicle may go into limp mode.
- Transmission may not shift properly.
Causes of the Ford p087a OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford code P087A include issues with the transmission fluid pressure sensor.
- P087A can be caused by a Faulty Clutch Position Sensor.
- A Clutch Position Sensor harness that is open or shorted.
- A Clutch Position Sensor circuit with poor electrical connection.
- A Faulty Clutch Motor.
- A Faulty Transmission Control Module (TCM).
Fixing Ford Error Code p087a Step By Step
To resolve fault code P087A on a Ford vehicle, inspect and replace the transmission fluid pressure sensor.
- To fix the Ford OBDII code P087A, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the transmission fluid pressure sensor.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the transmission fluid pressure sensor for proper operation.
- Replace the transmission fluid pressure sensor if it is faulty.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing Ford p087a Fault Code
Diagnosing and repairing fault code P087A on a Ford vehicle typically involves inspecting and servicing the transmission system.
The cost to diagnose and fix the Ford OBD code P087A typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Ford p087a OBD Code
The Ford fault code P087A relates to an issue with the transmission fluid pressure sensor.
Ford OBD code P087A means Transmission Fluid Pressure Sensor/Switch ‘D’ Circuit Range/Performance.
This code is triggered when the Transmission Control Module (TCM) detects that the signal from the transmission fluid pressure sensor/switch ‘D’ is outside the expected range or performance parameters.
The sensor/switch ‘D’ is typically located within the transmission valve body and is responsible for monitoring the fluid pressure in the transmission.
When the sensor/switch ‘D’ sends a signal that is not within the expected range, the TCM will set code P087A to indicate a potential issue with the transmission fluid pressure sensor/switch ‘D’ circuit.
Mechanic’s Tech Notes
Detailed information on Ford code P087A, focusing on transmission fluid pressure sensor C circuit low.
To diagnose and fix OBDII code P087A on a Ford vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P087A fault code.
FAQ
OBD code P087A in a Ford means an issue with the Clutch Position Sensor circuit. Check sensor, wiring, and connectors for faults.
Common symptoms of OBD code P087A in a Ford vehicle include Engine Light ON, caused by issues like faulty Clutch Position Sensor or Transmission Control Module. Fix involves inspecting wiring and connectors.
Possible causes of OBD code P087A in a Ford vehicle include a faulty Clutch Position Sensor, open/shorted sensor harness, poor electrical connection, faulty Clutch Motor, or Transmission Control Module.
Wrap Up
If your Ford is displaying OBD code P087A and experiencing shifting issues, it could be caused by a faulty transmission fluid pressure sensor, wiring problems, or low transmission fluid level.
The P087A code indicates a malfunction in the transmission fluid pressure sensor D circuit.
To address Ford OBD code P087A, check the transmission fluid level and condition, inspect the wiring harness for any damage or loose connections, and test the transmission fluid pressure sensor D for proper operation.
Replace any faulty components as needed to resolve the issue.
