The OBD code P061C for Ford indicates a problem with the crankshaft position sensor (CKP) or camshaft position sensor (CMP) circuit in the powertrain control module (PCM).
Symptoms include the Engine Light being ON.
The issue can be caused by faulty sensors, wiring harness issues, or a defective PCM.
It is a moderate concern.
To fix it, inspect and repair any damaged components or wiring connections related to the CKP and CMP sensors.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p061c OBD Code
The vehicle may experience issues related to the internal control module torque calculation performance.
- Symptoms: Engine Light ON.
- Vehicle may experience a nostart condition.
- Engine may stall while driving.
- Vehicle may have difficulty starting.
- Engine may run rough or have poor acceleration.
Causes of the Ford p061c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford fault code P061C include issues with the internal control module processor.
- P061C can be caused by a faulty Crankshaft Position Sensor (CKP).
- A CKP harness that is open or shorted.
- A CKP circuit with a poor electrical connection.
- A faulty Camshaft Position Sensor (CMP).
- A CMP harness that is open or shorted.
- A CMP circuit with a poor electrical connection.
- A faulty Powertrain Control Module (PCM).
Fixing Ford Error Code p061c Step By Step
Address the internal control module engine RPM performance issue indicated by fault code P061C.
- To fix the Ford OBDII code P061C, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the transmission control module (TCM).
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider reprogramming or replacing the TCM as necessary to address the fault code.
Cost Of Fixing Ford p061c Fault Code
Diagnosing and repairing fault code P061C on a Ford vehicle may involve replacing the internal control module processor.
The cost to diagnose and fix the Ford OBD code P061C typically ranges from $75 to $150, based on a repair time estimate of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Ford p061c OBD Code
The Ford fault code P061C relates to a faulty internal control module torque calculation.
Ford OBD code P061C means that the internal control module engine RPM performance is out of range.
This code is triggered by the ECM (Engine Control Module) when it detects that the engine RPM performance is not within the expected range.
The ECM monitors engine RPM to ensure proper operation and performance.
If the engine RPM deviates from the specified range, the ECM will set code P061C.
This code is related to the engine’s RPM performance and can be caused by issues such as a faulty ECM, wiring issues, or sensor malfunctions affecting engine RPM readings.
Mechanic’s Tech Notes
Detailed information on Ford fault code P061C, including possible causes and diagnostic steps.
To diagnose and fix OBDII code P061C in a Ford vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the P061C fault code.
FAQ
Common symptoms of OBD code P061C in a Ford vehicle include Engine Light ON, caused by issues with Crankshaft Position Sensor, Camshaft Position Sensor, or Powertrain Control Module.
The typical cause of OBD code P061C in Ford vehicles is a faulty Crankshaft Position Sensor (CKP), CKP harness issues, or faulty Powertrain Control Module (PCM).
Diagnose and repair OBD code P061C in a Ford: Symptoms Engine Light ON; Causes Faulty CKP/CMP/PCM; Fix Inspect wiring, connectors for damage or corrosion.

Wrap Up
If your Ford is displaying OBD code p061c, you may experience issues like rough idling, stalling, or poor acceleration.
This code typically indicates a problem with the internal control module torque calculation performance.
Possible causes include faulty sensors, wiring problems, or issues with the transmission fluid level or quality.
To address Ford OBD code p061c, start by checking the wiring harness for any visible damage or loose connections.
Test the sensors involved in torque calculation, such as the transmission fluid temperature sensor or the turbine speed sensor.
Ensure the transmission fluid level and condition are within specifications to rule out