[SOLVED] Ford P0349 Code: Fast Fix For Camshaft Position Sensor

The OBD code P0349 for Ford indicates a problem with the Camshaft Position Sensor Circuit A Intermittent Bank 2. Symptoms include the Engine Light ON, lack of power, and engine stalling.

Common causes are a faulty camshaft position sensor, wiring issues, or problems with the Variable Cam Timing (VTC) solenoid.

This issue should be addressed promptly to prevent further damage.

A possible fix involves inspecting the wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle may experience rough idling, misfires, or stalling with Ford fault code P0349.

  • With Ford OBD code P0349, the Engine Light will be ON.
  • Lack/Loss of Power may be experienced.
  • Engine Stall can occur.

Possible reasons for Ford P0349 include camshaft position sensor circuit malfunction or sensor wiring issues.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

  • P0349 can be caused by a Faulty Camshaft Position Sensor.
  • An open or shorted Camshaft Position Sensor harness.
  • Poor electrical connection in the Camshaft Position Sensor circuit.
  • A faulty Variable Cam Timing (VTC) Solenoid.
  • A faulty starter motor.
  • Issues in the Starting system circuit.
  • A dead (weak) battery.

Replace the camshaft position sensor on a Ford vehicle displaying fault code P0349.

  • To fix the Ford OBDII code P0349, start by reviewing the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the camshaft position sensor circuit.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If no issues are found with the wiring and connectors, proceed to test the camshaft position sensor using a multimeter to ensure it is functioning correctly.
  • Replace the camshaft position sensor if it fails the test.
  • Clear the fault codes using an OBDII scanner and test drive the vehicle to verify that the issue has been resolved.

The repair for Ford fault code P0349 may involve replacing the camshaft position sensor.

The cost to diagnose and fix Ford OBD code P0349 typically ranges from $75 to $150 per hour for labor rates.

With an estimated repair time of 1. 0 hour, the total cost will likely be between $75 and $150, depending on shop rates and the complexity of the repair.

Fault code P0349 in Ford indicates a problem with the Camshaft Position Sensor A Circuit Intermittent Bank 2.

Ford OBD code P0349 means that a problem has been detected in the camshaft position sensor A circuit on bank 2. This code is triggered by the Engine Control Module (ECM) when it detects an incorrect voltage or waveform from the camshaft position sensor.

The camshaft position sensor is responsible for monitoring the position of the camshaft in relation to the crankshaft to ensure proper engine timing.

When the ECM receives a signal that is outside of the expected range from the camshaft position sensor, it will trigger the P0349 fault code.

Detailed information on diagnosing and repairing fault code P0349 in Ford vehicles.

To diagnose and fix OBDII code P0349 in a Ford vehicle, start by visually inspecting the camshaft position sensor and its wiring harness for any damage or loose connections.

Use a voltmeter to check for proper voltage at the sensor connector.

Next, use a scan tool to monitor the camshaft position sensor data while the engine is running to ensure it is functioning correctly.

If the sensor is receiving power and ground but still throwing the code, consider replacing the camshaft position sensor itself.

Additionally, check for any related technical service bulletins from Ford that may provide further insight into common issues and solutions for this specific fault code.

1. What are the symptoms of OBD code P0349 in a Ford vehicle?

Symptoms of OBD code P0349 in a Ford: Engine Light ON, lack of power, engine stall. Causes: Faulty camshaft sensor, wiring issues. Fix: Inspect sensor, wiring for damage.

2. What is the typical cause of OBD code P0349 in a Ford vehicle?

The typical cause of OBD code P0349 in a Ford vehicle is a faulty camshaft position sensor, open/shorted sensor harness, poor electrical connection, or VTC solenoid issue.

3. How can I fix OBD code P0349 in my Ford vehicle?

To fix OBD code P0349 in your Ford vehicle, check the camshaft position sensor, wiring harness, connectors, and related components for damage or poor connections.

Ford p0349 error fault code explained

If your Ford is displaying OBD code P0349, you may experience engine misfires, rough idling, or difficulty starting.

This code typically indicates a problem with the camshaft position sensor circuit, such as a faulty sensor, damaged wiring, or poor connections.

To address Ford OBD code P0349, begin by inspecting the camshaft position sensor and its wiring harness for any signs of damage or corrosion.

Test the sensor’s electrical connectors for proper connection and continuity.

If necessary, replace the camshaft position sensor and repair any wiring issues to resolve the fault.

Scroll to Top