The OBD code P0345 for Ford indicates a problem with the Camshaft Position Sensor A Circuit.
Symptoms include the Engine Light ON, lack of power, and engine stalling.
Common causes are a faulty camshaft position sensor, wiring issues, or problems with the Variable Cam Timing (VTC) solenoid.
This issue should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting and repairing the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p0345 OBD Code
The vehicle may experience rough idling or stalling with Ford fault code P0345.
- With Ford OBD code P0345, the Engine Light will be ON.
- Lack of power may be experienced.
- The engine could stall unexpectedly.
Causes of the Ford p0345 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Ford P0345 include camshaft position sensor circuit malfunction or sensor wiring issues.
- P0345 can be caused by a Faulty Camshaft Position Sensor.
- A Camshaft Position Sensor harness that is open or shorted.
- A Camshaft Position Sensor circuit with poor electrical connection.
- Issues with the Variable Cam Timing (VTC) Solenoid.
- A Faulty starter motor.
- Problems with the Starting system circuit.
- A Dead (Weak) battery.
Fixing Ford Error Code p0345 Step By Step
Replace the camshaft position sensor on the Ford vehicle displaying fault code P0345.
- To fix the Ford OBDII code P0345, start by reviewing the possible causes related to the camshaft position sensor circuit.
- Visually inspect the wiring harness and connectors for any damage or corrosion.
- Check the connector pins for any signs of being broken, bent, or pushed out.
- Test the camshaft position sensor for proper operation and replace if necessary.
- Clear the fault codes and perform a test drive to ensure the issue has been resolved.
Cost Of Fixing Ford p0345 Fault Code
Diagnosing and repairing fault code P0345 on a Ford typically involves inspecting and replacing the camshaft position sensor.
The cost to diagnose and fix the Ford OBD code P0345 typically ranges from $75 to $150, based on a labor time estimate of 1. 0 hour.
Factors like shop rates and the complexity of the repair can influence the final cost.
Details of the Ford p0345 OBD Code
Fault code P0345 in Ford indicates a camshaft position sensor circuit malfunction in bank 2.
Code P0345 for Ford vehicles means Camshaft Position Sensor A Circuit Malfunction (Bank 2).
This code is triggered when the camshaft position sensor for bank 2 sends a signal to the Engine Control Module (ECM) that is outside the expected range.
The camshaft position sensor helps the ECM determine the position of the camshaft in relation to the crankshaft for proper engine operation.
If the sensor or its circuit malfunctions, it can lead to drivability issues and potentially affect engine performance.
Mechanic’s Tech Notes
For Ford code P0345, check camshaft position sensor circuit for signal issues causing engine performance problems.
To diagnose and fix OBDII code P0345 on a Ford, start by checking the camshaft position sensor’s wiring harness and connectors for any damage or corrosion.
Use a voltmeter to test the sensor’s power and ground connections.
Verify the sensor’s signal using a scan tool capable of reading live data.
If the sensor is receiving power and ground but not sending a signal, it may need replacement.
Additionally, ensure the timing chain or belt is correctly aligned.
If all checks out, consider reprogramming the engine control module (ECM) as a last resort.
FAQ
Common symptoms of OBD code P0345 in a Ford vehicle include Engine Light ON, lack of power, engine stall. Causes may be faulty camshaft position sensor or related wiring issues.
The typical cause of OBD code P0345 in a Ford vehicle is a faulty camshaft position sensor, open/shorted harness, poor electrical connection, or VTC solenoid issue.
Diagnose and repair OBD code P0345 in your Ford by checking the camshaft position sensor, wiring harness, connectors, and related components for faults or damage.
Wrap Up
If your Ford is displaying OBD code P0345, you may experience rough idling, poor acceleration, or stalling.
This code typically indicates a fault with the camshaft position sensor A circuit, which could be caused by a faulty sensor, damaged wiring, or poor connections.
To address Ford OBD code P0345, start by inspecting the camshaft position sensor and its wiring harness for any visible damage.
Test the sensor’s electrical connections for proper voltage and continuity.
If necessary, replace the sensor and repair any wiring issues to resolve the problem effectively.
