The OBD code P0246 for Ford indicates a fault with the Turbocharger Boost Control Position Sensor Circuit Range/Performance.
This affects the turbocharger system.
Symptoms include the Engine Light being ON.
The issue is commonly caused by a faulty Turbo Boost Control Solenoid Valve.
It is important to address promptly to prevent potential engine damage.
A possible fix is to inspect and repair any damaged wiring or connectors related to the Turbo Boost Control Solenoid Valve.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford p0246 OBD Code
The vehicle may experience a lack of power or acceleration under heavy load.
- Symptoms for Ford OBD code P0246: Engine Light ON (or Service Engine Soon Warning Light).
- Reduced engine power under acceleration.
- Turbocharger not engaging properly.
- Possible hissing or whooshing noise from the turbocharger area.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Ford p0246 OBD Code
P0246 in Ford vehicles typically indicates a turbocharger wastegate solenoid performance issue.
- P0246 can be caused by a faulty Turbo Boost Control Solenoid Valve.
- A Turbo Boost Control Solenoid Valve harness that is open or shorted.
- A Turbo Boost Control Solenoid Valve circuit with poor electrical connection.
- A faulty Engine Control Module (ECM).
- Or a faulty Wastegate.
Fixing Ford Error Code p0246 Step By Step
Address the issue by inspecting the turbocharger wastegate solenoid circuit for potential faults or damage.
- To fix the Ford OBDII code P0246, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the turbocharger wastegate solenoid for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the turbocharger wastegate solenoid.
Cost Of Fixing Ford p0246 Fault Code
Diagnosing and repairing fault code P0246 on a Ford typically involves addressing turbocharger boost control performance issues.
The cost to diagnose and fix the Ford OBD code P0246 is typically based on an estimated repair time of 1. 0 hour, with labor rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the Ford p0246 OBD Code
Ford code P0246 relates to turbocharger wastegate solenoid performance issues.
Code P0246 for Ford vehicles means that the turbocharger wastegate solenoid A performance is below threshold.
This code is triggered by the Engine Control Module (ECM) when it detects that the wastegate solenoid is not functioning properly.
The wastegate solenoid is a component of the turbocharger system that controls the amount of boost pressure produced by the turbocharger.
When the ECM detects that the wastegate solenoid is not performing within the expected parameters, it will trigger the P0246 fault code.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing fault code P0246 in Ford vehicles.
To diagnose and fix OBDII code P0246 in a Ford vehicle, start by checking the transmission control module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P0246 fault code.
FAQ
Common symptoms of OBD code P0246 in a Ford vehicle include Engine Light ON, caused by issues with the Turbo Boost Control Solenoid Valve system.
The typical cause of OBD code P0246 in a Ford vehicle is a faulty Turbo Boost Control Solenoid Valve or related wiring issues.
Diagnose and repair OBD code P0246 in your Ford by checking Turbo Boost Control Solenoid Valve, harness, connectors, and ECM for faults.
Wrap Up
If your Ford is displaying OBD code P0246, you may experience poor engine performance, reduced fuel efficiency, or even stalling.
This code typically indicates a fault in the turbocharger wastegate solenoid performance due to issues like a faulty wastegate solenoid, wiring problems, or a stuck wastegate.
To address Ford OBD code P0246, start by checking the wastegate solenoid for proper operation and wiring harness for any damage or loose connections.
Ensure the wastegate moves freely and the solenoid receives the correct voltage signal.
Replace
