The OBD code P0236 for Ford indicates a problem with the turbocharger/supercharger boost sensor circuit.
Symptoms include the Check Engine light being illuminated.
Causes may include a faulty boost pressure sensor, wiring issues, or engine misfires.
This issue should be addressed promptly to prevent potential engine damage.
A possible fix involves inspecting the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford p0236 OBD Code
The vehicle may experience a lack of power or hesitation during acceleration with fault code P0236.
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Engine may hesitate or stumble during acceleration.
- Turbocharger may not engage properly.
Causes of the Ford p0236 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P0236 on a Ford vehicle include turbocharger boost sensor circuit performance issues.
- P0236 can be caused by a faulty boost pressure sensor.
- A boost pressure sensor harness that is open or shorted.
- A boost pressure sensor circuit with poor electrical connection.
- A faulty Turbo/Super Charger.
- Engine over temperature.
- Ignition misfire exceeding the calibrated threshold.
- A faulty Knock sensor (KS).
Fixing Ford Error Code p0236 Step By Step
Address the turbocharger boost sensor circuit performance issue indicated by Ford code P0236.
- To fix Ford OBDII code P0236, first, review the possible causes related to the turbocharger boost sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the turbocharger boost sensor for proper operation.
- Replace the turbocharger boost sensor if it is faulty.
- Clear the fault codes and test drive the vehicle to verify the repair.
Cost Of Fixing Ford p0236 Fault Code
Diagnosing and repairing fault code P0236 on a Ford typically involves addressing turbocharger boost sensor issues.
The cost to diagnose and fix the Ford OBD code P0236 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford p0236 OBD Code
Ford code P0236 relates to turbocharger boost sensor A circuit range/performance issue.
OBD code P0236 for Ford vehicles indicates a Turbocharger Boost Sensor A Circuit Range/Performance issue.
This code is triggered by the Engine Control Module (ECM) when it detects that the input signal from the turbocharger boost sensor does not match the expected parameters.
The turbocharger boost sensor is responsible for monitoring the pressure levels in the intake manifold and providing this information to the ECM.
The ECM uses this data to adjust the turbocharger boost pressure for optimal engine performance and efficiency.
When the ECM detects that the signal from the turbocharger boost sensor is outside of the predetermined range, it will trigger the P0236 fault code and illuminate the Check Engine Light on the dashboard.
This could be caused by a faulty sensor, wiring issues, or problems with the turbocharger system itself.
Diagnosing and repairing the underlying cause of the P0236 trouble code typically involves testing the turbocharger boost sensor, checking the sensor wiring for any faults, and inspecting the turbocharger system for any leaks or malfunctions.
Mechanic’s Tech Notes
Troubleshooting code P0236 indicates a problem with the turbocharger boost sensor circuit range/performance.
To diagnose and fix OBDII code P0236 in a Ford vehicle, start by checking the power and ground to the Transmission Control Module (TCM) using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address the root cause of the code.
FAQ
Common symptoms of OBD code P0236 in a Ford vehicle include Engine Light ON, loss of power, poor acceleration, and potential engine overheating issues.
The typical cause of OBD code P0236 in a Ford vehicle is a faulty boost pressure sensor, open/shorted harness, poor electrical connection, or faulty turbo/supercharger.
Diagnose and repair OBD code P0236 in a Ford: Check boost pressure sensor, wiring, connectors for faults. Inspect turbo, knock sensor, ignition misfire, and engine temperature.
Wrap Up
If your Ford is displaying OBD code p0236 and experiencing a lack of power, stalling, or rough idling, it may be caused by a faulty turbocharger boost sensor, damaged wiring in the boost sensor circuit, or low boost pressure.
To address Ford OBD code p0236, check the turbocharger boost sensor for proper operation, inspect the wiring harness for any signs of damage or corrosion, and ensure all connectors are securely attached.
Consider testing the boost sensor and its circuit for any faults that may be causing the issue.
