The OBD code P0141 for Ford indicates a fault with the Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit.
Symptoms include the Engine Light ON, higher fuel consumption.
The issue is commonly caused by a faulty sensor, circuit fuse, wiring issues, or a faulty Engine Control Module (ECM).
While not an immediate threat, it can affect emissions and fuel efficiency.
A possible fix involves inspecting and repairing the sensor circuit and related components.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Ford p0141 OBD Code
The vehicle may experience issues related to the oxygen sensor heater circuit malfunction (Ford P0141).
- Symptoms: Engine Light ON.
- Higher fuel consumption.
Causes of the Ford p0141 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Ford P0141 include faulty oxygen sensor, wiring issues, or a damaged catalytic converter.
- P0141 can be caused by a Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2.
- A Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse.
- A Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground.
- A Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection.
- Or a Faulty Engine Control Module (ECM).
Fixing Ford Error Code p0141 Step By Step
Replace the faulty oxygen sensor in bank 1 sensor 2 for Ford code P0141.
- To fix Ford OBDII code P0141, start by reviewing the possible causes related to the oxygen sensor heater circuit.
- Visually inspect the wiring harness and connectors for any damage or corrosion.
- Check the connector pins for any signs of being broken, bent, or pushed out.
- Replace the oxygen sensor if necessary.
- Clear the fault code and perform a test drive to verify the repair.
Cost Of Fixing Ford p0141 Fault Code
Diagnosing and repairing fault code P0141 on a Ford typically involves addressing the oxygen sensor circuit malfunction.
The cost to diagnose and fix a Ford OBD code P0141 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford p0141 OBD Code
Fault code P0141 in Ford vehicles relates to the oxygen sensor heater circuit malfunction in bank 1 sensor 2.
OBD code P0141 for Ford vehicles indicates an issue with the O2 sensor heater circuit for Bank 1 Sensor 2. This code is triggered when the Engine Control Module (ECM) detects that the O2 sensor’s heater circuit is not operating within the expected parameters.
The O2 sensor in question is located after the catalytic converter on the bank of cylinders that contains cylinder 1. The ECM monitors the O2 sensor’s heater circuit to ensure it reaches operating temperature quickly for accurate fuel control and emissions reduction.
Mechanic’s Tech Notes
For Ford code P0141, check the oxygen sensor heater circuit for issues.
To diagnose and fix OBDII code P0141 in a Ford vehicle, start by checking the wiring harness and connectors related to the oxygen sensor heater circuit.
Use a voltmeter to test the voltage supply to the sensor and ensure proper grounding.
Inspect the connector pins for any damage, corrosion, or poor connections.
If the wiring and connectors appear to be in good condition, the issue may lie with the oxygen sensor itself.
Consider replacing the oxygen sensor if all other components check out.
Remember to clear the code after making any repairs to see if the issue has been resolved.
FAQ
OBD code P0141 in a Ford: Symptoms Engine Light ON, higher fuel consumption. Causes Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2. Fix Inspect wiring and connectors.
Common causes of OBD code P0141 in a Ford vehicle include a faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 and related wiring issues.
Diagnose and fix OBD code P0141 in a Ford: Symptoms Engine Light ON, higher fuel consumption. Causes Faulty H2OS Bank 1 Sensor 2. Fix Inspect wiring harness and connectors.
Wrap Up
If your Ford is displaying OBD code P0141, you may experience poor fuel economy, rough idling, or a failed emissions test.
This code typically indicates a fault with the oxygen sensor heater circuit in bank 1 sensor 2. Causes can include a faulty oxygen sensor, damaged wiring, or a blown fuse.
To address Ford OBD code P0141, start by checking the oxygen sensor’s wiring and connector for any signs of damage or corrosion.
Test the sensor’s heater circuit resistance and replace the oxygen sensor if necessary.
Ensure all connections are secure and inspect the fuse related to the
