The OBD code C2008 for Ford indicates an issue with the ABS pump motor supply voltage circuit.
Symptoms include the ABS warning light and engine light being illuminated.
This is typically caused by a faulty component, open or shorted harness, or poor electrical connection.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford c2008 OBD Code
The vehicle displays a warning light on the dashboard indicating fault code Ford c2008.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Strange noises from the ABS module.
- Brake pedal may feel different during braking.
Causes of the Ford c2008 OBD Code
Possible triggers for Ford C2008 include faulty wheel speed sensor, damaged wiring, or ABS module issues.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C2008 can be caused by a faulty wheel speed sensor.
- A damaged wiring harness.
- An open circuit in the ABS system.
- Poor electrical connection at the sensor.
- Corroded grounds affecting sensor signals.
Fixing Ford Error Code c2008 Step By Step
Address the issue by inspecting the wiring harness for possible damage or loose connections.
- To fix the Ford OBDII code c2008, start by reviewing the possible causes and visually examining the wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, perform a thorough check of the ABS module and sensors for any faults or malfunctions.
- Test the wheel speed sensors and their circuits for proper operation.
- If no issues are found with the wiring or sensors, consider reprogramming or replacing the ABS module as necessary.
Cost Of Fixing Ford c2008 Fault Code
Diagnosing and repairing fault code Ford c2008 may require replacement of the ABS module.
The cost to diagnose and fix Ford OBD code C2008 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop location, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford c2008 OBD Code
Ford code C2008 relates to a fault in the vehicle’s steering angle sensor.
OBD code C2008 for Ford vehicles indicates a fault with the steering angle sensor circuit range/performance.
This code is triggered by the ABS module when it detects that the steering angle sensor signal is out of the expected range or not performing as it should.
The steering angle sensor is a critical component of the vehicle’s stability control system, providing data on the steering wheel position and rate of turn to help enhance vehicle stability and safety.
When this sensor malfunctions or sends incorrect signals, it can affect the proper operation of the stability control system, potentially compromising vehicle handling and safety.
Mechanic’s Tech Notes
For Ford code C2008, check for faults in the ABS module communication circuit.
To diagnose and fix OBDII code Ford C2008, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the C2008 fault code.
FAQ
Common symptoms for OBD code C2008 in a Ford: ABS Warning Light ON, Engine Light ON. Causes: Faulty ABS module, open/shorted harness, poor electrical connection. Fix: Inspect wiring and connectors for damage.
OBD code C2008 in Ford vehicles is typically caused by a faulty ABS system, open/shorted harness, or poor electrical connection. Inspect and repair wiring/connectors.
Diagnose OBD code C2008 in Ford: Symptoms ABS & Engine Light ON. Causes Faulty, open/shorted harness, poor connection. Fix Inspect wiring, connectors for damage/corrosion.
Wrap Up
If your Ford is displaying OBD code c2008 along with ABS warning lights, it may indicate a fault in the rear wheel speed sensor circuit.
This could be caused by a faulty wheel speed sensor, damaged wiring, or poor connections at the sensor or module.
To address Ford OBD code c2008, inspect the rear wheel speed sensor and its wiring for any visible damage.
Test the sensor’s resistance and check for proper voltage supply.
Ensure connectors are clean, secure, and free of corrosion.
Replace the sensor if necessary and repair any wiring issues found.
