The OBD code C1327 for Ford indicates an issue with the Brake Fluid Level Sensor Circuit.
This affects the AntiLock Brake System (ABS) and can trigger the ABS warning light and engine light to illuminate.
Common causes include low brake fluid level, a faulty sensor, or wiring issues.
It’s important to address this problem promptly to ensure proper brake system functionality.
A possible fix involves inspecting the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Ford c1327 OBD Code
The vehicle displays a warning light indicating a fault with the Ford C1327 code.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different than usual.
- Unusual noises coming from the ABS system.
Causes of the Ford c1327 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford code C1327 include faulty steering angle sensor or wiring issues.
- C1327 can be caused by a low brake fluid level.
- A faulty Brake Fluid Level Sensor.
- An open or shorted Brake Fluid Level Sensor harness.
- A poor electrical connection in the Brake Fluid Level Sensor circuit.
Fixing Ford Error Code c1327 Step By Step
Resolve fault code C1327 on a Ford by inspecting and repairing the circuit for the left rear wheel speed sensor.
- To fix the Ford OBDII code C1327, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the ABS module for proper operation.
- Consider reprogramming or replacing the ABS module if necessary to resolve the C1327 fault code.
Cost Of Fixing Ford c1327 Fault Code
The repair for Ford code C1327 typically involves diagnosing and fixing issues with the brake pressure transducer.
The cost to diagnose and fix Ford OBD code C1327 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour, affecting the total cost.
Additional factors like shop rates and complexity of the repair can also influence the final price.
Details of the Ford c1327 OBD Code
Ford code C1327 relates to an issue with the solenoid circuit in the suspension system.
Ford OBD code C1327 means Vehicle Speed Output Circuit Failure.
This code is triggered by the ABS module when it detects a fault in the vehicle speed output circuit.
The vehicle speed output circuit is responsible for transmitting the vehicle speed signal to various control modules in the vehicle, such as the ABS module, transmission control module, and instrument cluster.
When this circuit fails, it can lead to issues with the speedometer accuracy, ABS system operation, and transmission shifting.
Mechanic’s Tech Notes
For Ford code C1327, check for issues with the brake pressure transducer circuit.
To diagnose and fix OBDII code C1327 in a Ford vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the C1327 fault code.
FAQ
OBD code C1327 in a Ford indicates an issue with the Brake Fluid Level Sensor circuit. Check for low brake fluid, faulty sensor, or wiring problems.
Common symptoms for Ford code C1327 include ABS warning light on, engine light on, caused by low brake fluid, faulty sensor, or wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code C1327 in your Ford by checking for low brake fluid, faulty sensor, or wiring issues. Inspect wiring harness and connectors for damage.
Wrap Up
If your Ford is displaying OBD code C1327 and you’re experiencing issues with the brake pressure transducer circuit, it could be caused by a faulty brake pressure transducer, damaged wiring, or poor connections in the brake system.
To address Ford OBD code C1327, start by inspecting the brake pressure transducer and its wiring harness for any visible damage.
Test the connectors for proper connection and continuity.
Replace the brake pressure transducer if necessary and ensure all connections are secure to resolve the issue.
